The Boomaroo 25 was marketed as a practical trailerable cruiser that brought roomy accommodation and seaworthy manners to the 25‑foot segment. Its combination of a masthead sloop rig, fibreglass hull and a swing keel gives owners flexibility to explore shallow anchorages, trailer the boat and still enjoy a stable, well‑ballasted platform for coastal passages.
Although built in modest numbers and primarily in Australia, the 25 retains a clear identity: a moderate waterline and beam, a relatively heavy ballast ratio and a simple, conservative deck and cockpit layout intended for short‑handed use. This guide describes the known design details, explains how those features affect on‑water behaviour, and highlights the checks a buyer should prioritise for the ageing examples that appear on the Australian second‑hand market.
Overview and design purpose
The Boomaroo 25 was conceived as a family‑friendly coastal cruiser that could be trailered and launched from ramps or slipways. Its swing keel permits shallow‑water access and easier road transit, while the masthead sloop rig keeps sail handling straightforward for two people. The design sits in the practical end of the small cruising yacht spectrum rather than the high‑performance trailer‑sailer niche: emphasis is on accommodation, stability and ease of ownership rather than racing performance.
Key roles the 25 was intended for are weekend cruising, coastal exploration and club racing in a local handicap fleet. Owners in Australia have used the model for sheltered‑water passages, bay cruising and short coastal hops where the swing keel provides access to sheltered anchorages not reachable by fixed‑keel boats of similar size.
Designer, builder and production
The design is attributed to Frank Butler, a prolific designer known for a number of production cruisers. Construction and production were undertaken by Boomaroo Yachts in Australia. Exact production years beyond the reported first build date around 1980 are not consistently documented across available listings; the model appears in Australian brochures and classified listings through the 1980s and older dealer material.
Because Boomaroo was a smaller, locally focused builder, production volumes were limited compared with larger international manufacturers. That means boats on the second‑hand market can vary significantly in condition and equipment as owners customised and upgraded instrumentation, engines and accommodation fit‑outs over the decades.
Construction and hull design
Hull construction is conventional fibreglass (glassfibre) reinforced plastic (GRP) with internal structure and ballast arranged for a moderate displacement cruiser. The Boomaroo 25 uses a swing keel — a pivoting lifting keel — that combines an inner trunk and a keel that can be raised and lowered. This arrangement reduces draught for launching, trailer transport and shallow water while providing a deeper submerged keel for windward performance when lowered.
The hull form is conservative: a moderate beam for the length provides interior volume and initial stability, while the relatively heavy ballast (a substantial proportion of the displacement) improves righting moment and offshore steadiness for a 25‑foot boat. Rudder type on surviving records is a transom‑hung or partially skeg‑protected rudder controlled by a tiller — typical for boats of this type and era — which simplifies maintenance and provides direct helming feel.
Specifications
Cockpit, deck layout and sail handling
The Boomaroo 25’s cockpit and deck reflect a pragmatic, short‑handed cruising intention. The cockpit is moderately sized for the length, with seating for crew and a layout that keeps primary sail controls within arm’s reach of the helmsman. Two cockpit locker hatches and a forward sail locker are noted in period brochures, providing protected stowage for warps, anchors and ground tackle.
Sail control is straightforward: a masthead headsail on a roller or hanked forestay (many boats were fitted with roller furling retrofits in later years) and a conventional slab‑reefing mainsail. Winch arrangements are basic but functional, typically with one or two self‑tailing winches for the genoa and halyards on the coachroof or mid‑cockpit coamings. The simple rig and limited sail area make single‑ or two‑person handling realistic for coastal passages.
Deck ergonomics favour practical movement: guardrails and stanchions are of standard height, side decks are wide enough for short passages forward and a bow pulpit and anchor roller are commonly fitted. The swing keel requires an accessible raising/lowering mechanism and maintenance of the keel trunk, which has implications for deck layout and below‑deck space.
Interior and accommodation
Internal layouts for the Boomaroo 25 were arranged to maximise sleeping and living space within a compact hull. A typical configuration includes a forward V‑berth (suitable for two adults or children), a small enclosed head forward or amidships depending on the original layout, and a saloon with two settees that convert into additional berths. Some examples include a quarter berth or single transverse berth aft for a fifth berth.
Headroom is modest — common for a 25‑foot design — so taller crew should expect crouched movement in some areas. The galley is compact with basic facilities: a small sink, icebox or fridge (often aftermarket) and a single or two‑burner gimballed cooker. Storage is distributed in lockers under settees and in cabinetry along the hull sides; owners report these spaces work well for weekend cruising but are limited for extended liveaboard use without careful gear curation.
Ventilation and light depend on the original hatch and portlight arrangement; many boats have an overhead hatch in the cockpit and coachroof ports, but buyers should inspect seals and retrofit options. The fibreglass interior finish of boats from this era is durable but prone to damp and age‑related cosmetic wear if not maintained.
Sailing and handling
On the water, the Boomaroo 25 behaves like a conservative, well‑ballasted coastal cruiser. The relatively high ballast ratio for a 25‑footer helps provide a steady motion and good righting moment for its size, which owners appreciate in confused seas and stronger winds. Hull speed is modest — around 6–6.5 knots theoretical — and the boat is tuned more for comfortable, predictable behaviour than for quick acceleration or light‑air stirring.
The swing keel gives a notable advantage for exploring shallow anchorages and for trailering, but there are trade‑offs: a lifting keel typically means a higher centre of gravity when retracted and different pitching characteristics compared with a fixed deep keel. When the keel is down, windward performance improves markedly; when up, leeway increases and pointing ability drops, so raising the keel for motoring into shallow anchorages is common practice.
Steering is direct and responsive with a tiller; the transom‑mounted or semi‑balanced rudder provides good feedback, which helps in close‑quarters work such as berthing or reefing. The masthead rig carries a larger headsail relative to the main, which means headsail trimming influences balance strongly and a reefed headsail or smaller jib is often used in stronger winds to maintain helm balance.
Australian sailing uses and conditions
The Boomaroo 25 is well suited to Australian coastal conditions where shallow harbours, tidal flats and trailer access are common. Owners typically use the boat for weekend getaways in sheltered bays, short coastal hops and club racing. The swing keel makes it practical for launching from ramps and for visiting tidal anchorages around estuaries and islands that would be inaccessible to deep‑keel boats.
For offshore work beyond sheltered coastal passages, owners should note that the 25 is a small vessel and demands conservative seamanship. Its ballast and hull form give it reasonable initial stability, but heavy weather passages require planning, careful weather windows and conservative loading. For most Australian owners, the boat’s sweet spot is coastal cruising and island‑hopping rather than extended open‑ocean passagemaking.
Principal strengths
- Trailerability and shallow‑water access: Swing keel and modest beam make ramp launching and tidal exploration practical.
- Accommodation relative to length: Roomy interior and sensible layout for weekend cruising compared with many 25ft competitors.
- Robust, conservative design: Heavy ballast for good initial stability and forgiving handling for cruising sailors.
- Simple systems and ease of maintenance: Tiller steering, conventional rig and GRP construction reduce specialist servicing needs.
Limitations and compromises
- Ageing systems and parts: Boats are several decades old; engines, electrics, rigging and upholstery are commonly in need of refresh or replacement.
- Swing‑keel maintenance: The keel trunk, pivot and raising mechanism are wear points that need attention and can be costly to repair if neglected.
- Performance constraints: Not a high‑performance trailer‑sailer — light‑air performance and pointing are modest compared with modern designs.
- Headroom and liveability: Limited standing headroom and compact galley restrict long‑term liveaboard comfort.
Ownership, maintenance and refit
Owning an older Boomaroo 25 is often inexpensive on purchase price but requires an understanding of recurring maintenance. Key considerations include the keel pivot and winch condition, rigging age and chainplate integrity, through‑hull fittings, deck core condition around fittings and the state of the rudder stock and bearings.
Common refit work includes engine replacement or overhaul (many boats have small diesel or outboard auxiliary engines which owners upgrade), re‑rigging or replacing standing rigging after about 15–25 years, and updating electrical systems to modern safety standards (navigation lights, battery charging, instruments). Replacing seals on hatches and portlights and checking the condition of the mast step and the keel trunk interior are practical priorities on older boats.
What to inspect before buying
- Keel trunk and lifting mechanism: Look for corrosion, wear at the pivot, play in the keel and evidence of grounding damage. Ensure the keel raises and lowers under control and inspect seals where the trunk penetrates the deck and sole.
- Hull and deck delamination: Tap test and look for soft spots around chainplates, stanchion bases and winch fittings. Moisture meters are useful for detailed inspection.
- Rigging and chainplates: Check standing rigging for corrosion, swage condition and age. Examine chainplates for corrosion and bed seals for leaks.
- Rudder and tiller bearings: Check for play, water ingress and condition of gudgeons and pintles. Ensure tiller movement is smooth and secure.
- Engine and propulsion: Confirm condition, service history and whether the boat uses an outboard or inboard auxiliary. Start the engine cold and at operating temperature to observe performance.
- Electrical and safety gear: Verify batteries, switches, wiring and safety equipment. EPIRB, bilge pump operation and navigation lights are essential checks.
- Interior condition: Mould, water stains or soft timber can indicate past leaks. Examine seacocks, hoses and plumbing for age‑related deterioration.
Who this boat suits
The Boomaroo 25 is best suited to couples or small families who prioritise affordability, trailer‑accessibility and the ability to explore shallow Australian bays and estuaries. It appeals to sailors who want a comfortable weekend cruiser with more accommodation feel than a 20‑foot trailer sailer, yet without the costs and mooring demands of a larger yacht.
It also works well as a project boat for owners willing to invest time into a refit: because the hull and layout are straightforward, sympathetic upgrades to propulsion, electronics and internal fit‑out can significantly improve comfort and reliability. It is less appropriate for sailors seeking top‑end performance, tall offshore passages without extensive modification, or those requiring full standing headroom and large tankage.
Sources consulted: sailboatdata.com, boatsonline.com.au, johncrawfordmarine.com.au, mauripro.com, sailboatlab.com
