The C&C 115 was introduced in the first decade of the 2000s as part of a refreshed C&C range aimed at owners who wanted a boat that could be raced competitively and still serve as a comfortable weekend or coastal cruiser. The design emphasises upwind performance, stiffness and controllability, while offering a straightforward accommodation plan and sail handling systems aimed at short‑handed crews.
As a modern cruiser‑racer the C&C 115 sits between pure race boats and traditional production cruisers: it is lighter and more performance‑oriented than full cruising designs of the same length, but retains amenities and systems that make it practical for couples or small families on coastal passages. The boat is most often encountered in club fleets, coastal offshore regattas and as an owner‑skipper weekend boat.
Overview and design purpose
The C&C 115 was conceived as a performance‑oriented cruiser with serious upwind ability and race potential while remaining useable for cruising. The brief was to take contemporary hull engineering — relatively slender waterline length, moderate beam carried aft, and a modern fin keel — and combine it with a robust deck layout and a manageable sail plan so a small crew could extract performance without constant trimming or complex systems.
This makes the 115 attractive to owners who want a single boat for both club competition and family cruising. Expect responsive handling, a lively feel in a breeze and generally efficient passage making; the trade‑offs are lighter displacement and correspondingly less volume and tankage than dedicated cruising yachts of similar length.
Designer, builder and production
The C&C 115 was designed by Tim Jackett, a contemporary naval architect known for clean performance hulls that balance racing ability with cruising practicality. The design dates to the mid‑2000s and was built under the C&C Yachts name during the company’s revitalised period when the marque returned to producing modern performance cruisers.
Production numbers were limited compared with mass‑market production boats of earlier eras; the 115 was a relatively specialised model targeting buyers looking for performance and build quality rather than volume sales. Build locations and exact production runs varied with the company’s changing ownership and manufacturing arrangements during that decade.
Construction and hull design
Construction uses contemporary sandwich laminates with cored topsides and a solid or heavily reinforced laminate in the keel and chainplate areas. The 115’s hull form favours a fine entrance, a moderate beam carried well aft for planing drive and form stability, and a relatively long waterline for its overall length to aid upwind speed and pointing ability.
The keel is a deep fin with a high aspect ratio and a substantial bulb or ballast bulb at the foot — a common arrangement for this class — giving a low centre of gravity and good righting moment. The rudder is an externally hung or spade‑type unit (designer variants exist), sized for precise helm feel and good control at speed. Construction attention was generally to a well‑executed production standard: reinforced chainplates, deck‑to‑hull joint engineered for modern loads and attention to weight distribution for performance.
Specifications
Cockpit, deck layout and sail handling
The cockpit is designed with clear crew paths, good sightlines to the helm and access to primary sail controls. Winch placement is oriented for short‑handed sailing: primary winches are in reach of a cockpit helmsperson and secondary control lines lead back to the cockpit on many fitted boats. A thoughtful mainsheet traveller position and reasonably sized cockpit lockers are typical.
Sail handling is usually arranged for a fractional rig with a relatively large mainsail and smaller headsail, making tacking and headsail changes easier for a small crew. Many boats were supplied or later retrofitted with roller‑furling headsails and roller reefing or slab reefing mains. Where fitted for performance, carbon spars, square‑topped mains and a bowsprit for asymmetric spinnakers were options that expanded downwind sail choices without adding undue complexity to the deck plan.
Deck access and safety features reflect C&C’s performance‑cruiser DNA: moderate freeboard, robust handholds, and a low coachroof profile that eases movement on deck. Anchor stowage, bow fittings and an optional integral bathing platform or boarding ladder were available depending on specification.
Interior and accommodation
Interior layouts for the 115 generally prioritise sailing capability while providing a comfortable coastal cruising fit‑out. The forward cabin typically houses a double berth and drawer storage; the saloon offers opposing settees that convert to additional berths. A modest aft cabin or quarter berth is common in several layouts, giving sleeping space for four to six aboard.
The galley is usually arranged to port or starboard adjacent to the companionway for good ventilation and convenient access when heeled. Expect a two‑burner gimballed stove, top‑opening fridge or coolbox and sensible locker space rather than the voluminous stowage found on larger cruising yachts. Heads layout is compact but serviceable, often forward of the companionway or adjacent to the forward cabin, and fitted with a shower in higher‑spec boats.
Ventilation and light are delivered through deck hatches and coachroof ports; headroom in saloon spaces is comfortable for an 11–12 m boat but not generous compared with boats designed primarily for liveaboard comfort. Materials and finishes generally aim at a balance between weight control and liveability: marine plywood joinery with teak or light timber facings, durable upholstery and functional hardware.
Sailing and handling
The C&C 115 sails as a modern, moderately light displacement boat: it accelerates quickly through chop, points well to windward and carries good control under sail due to the fin keel and effective rudder. The fractional rig encourages reliance on the mainsail for drive and trim; mast bend and vang control are important tuning tools to shape the main for different conditions.
In light airs the boat requires careful sail trim and sometimes reaching or running to keep momentum, but hull form and waterline length mean it will maintain speed once driven. In stronger winds the 115 remains controllable thanks to ballast ratio and hull form, but the owner should be prepared to reduce sail early compared with heavier cruisers to avoid excessive motion and maintain comfort.
Manoeuvring under power is typical of an 11–12 m inboard‑engined yacht: predictable and straightforward. The companionway location and engine access are generally adequate for routine maintenance; stern or transom layouts vary by fitout and may include optional swim platforms or extended boarding arrangements that affect propeller access.
Australian sailing uses and conditions
The C&C 115 adapts well to Australian club racing, coastal cruising and inshore/offshore weekend passages. Its upwind performance and manageable sail plan suit the strong, gusty conditions often encountered along southern and eastern Australian coasts, while the boat’s relatively shallow options and controlled motion make it practical for passages around reefed or tidal waters where frequent sail changes and good helm balance matter.
For owners planning extended coastal cruising in Australia, consider tankage and systems upgrades: the standard water and fuel capacities are suitable for weekend to short coastal passages but owners intending longer trips may increase tankage, refrigeration and energy generation (solar or wind) to match Australian cruising distances and remoteness.
Principal strengths
- Performance‑oriented hull and keel produce good upwind speed and pointing for the size.
- Fractional rig and modern sailplan make short‑handed sailing feasible without large overlapping genoas.
- Stiffness and righting moment from keel/bulb combination enhance control in heavier conditions.
- Practical interior for weekend cruising while still keeping weight and performance priorities.
- Robust deck layout with sensible control runs to the cockpit on most boats.
Limitations and compromises
The 115 balances performance against cruising comfort; that balance produces compromises buyers should understand. Internal volume and tankage are modest compared with similarly sized cruising yachts designed for liveaboard comfort. Owners seeking long‑term liveability, significant provisioning capacity or luxurious cabin space will find the 115 more Spartan.
Light‑displacement designs can be more active in a seaway: motion is livelier and crew comfort in sustained heavy conditions can be lower than heavier displacement cruisers. Likewise, some boats were delivered with performance options (carbon spars, larger sail inventories) that raise maintenance and replacement costs compared with standard cruising fitouts.
Ownership, maintenance and refit
Major ownership considerations are standard for performance production boats of the era: ensure the structural integrity of keel attachments and chainplates, examine laminate for signs of water ingress in cored areas, and check mast step and compression points for deck‑to‑hull joint soundness. Performance rigs and carbon spars (where fitted) demand specialist inspection for core condition, rig tuning and end‑fittings maintenance.
Refit priorities for Australian owners often include upgrading refrigeration and freshwater capacity, installing modern navigation/electronics (chartplotter, AIS, radar as required), and improving energy independence with solar panels and larger battery banks. Where boats have seen heavy racing use, expect accelerated wear on winches, running rigging and deck hardware and budget for replacement. Regular antifouling, shaft and cutlass bearing servicing, and engine commissioning are routine.
What to inspect before buying
- Keel bolts and keel joint: look for signs of movement, corrosion or previous repairs.
- Core condition around chainplates, mast step and deck fittings — probe for soft spots and evidence of past repairs.
- Rigging condition: standing rigging age, swage integrity, turnbuckles, and any carbon spar inspection reports if fitted.
- Hull laminate and repairs: evidence of osmosis, blistering, or poorly executed structural repairs.
- Engine service history and access: cooling system condition, shaft alignment and propeller condition.
- Winches and deck hardware: smooth operation and evidence of stripped threads or corrosion from heavy racing use.
- Electrical systems and batteries: capacity, condition and whether charging systems are adequate for Australian cruising needs.
- Sail inventory and condition: mainsail shape, halyard wear, and condition of any furling or downwind sails; replacement costs can be significant.
Who this boat suits
The C&C 115 will suit sailors who want a single boat that performs strongly in club racing but still works as a comfortable coastal cruiser for couples or small families. It particularly fits owner‑skippers and small crews who value upwind ability, responsive handling and a relatively light, well‑tuned boat over maximum interior volume and full cruising independency.
It is less suitable for liveaboard families who prioritise space, heavy stores capacity and long‑range autonomy without modification. Prospective buyers planning extended blue‑water cruising should factor in additional tankage, refrigeration and system upgrades before committing.
Sources consulted: sailboatdata.com, cruisingworld.com, canadianboating.ca, boatsonline.com.au, wikipedia.org
