The Dragonfly 35 is a mid‑sized cruising trimaran that occupies the yard between the smaller transportable Dragonfly 28 and the larger 36/40 series. It was developed to offer true offshore capability in a format that remains manageable for owners who want the benefits of a multihull without the permanent beam or beam‑related marina costs of a fixed‑ama boat.
Key to the model is the Dragonfly Swing‑Wing folding system that allows the amas to fold inboard alongside the main hull. That folding mechanism, paired with a performance‑orientated hull shape, a lifting centreboard and an efficient fractional sloop rig, gives the 35 a mix of good upwind ability, shallow draft options and a translatable berth footprint for marinas and transport.
Overview and design purpose
The Dragonfly 35 was conceived as a fast cruising trimaran that could serve both club sailors wanting exhilarating day sails and small crews seeking true offshore passagemaking. The design intent was to combine the speed and stability advantages of a trimaran with the practicalities of folding amas so the boat could be moored in a conventional monohull berth and launched from many marina facilities.
Design priorities included: a long centre‑hull for comfortable interior volume; narrow, wave‑piercing ama shapes to reduce drag and improve handling in chop; a lifting centreboard to allow variable draught and easy grounding; and an ergonomic deck layout suitable for short‑handed sailing. The result is a boat that trades some interior volume and simple one‑piece construction for markedly better performance and lower wetted surface than a monohull of similar length.
Designer, builder and production
The Dragonfly 35 was produced by Quorning Boats (trading as Dragonfly Trimarans), the Danish yard founded by Børge Quorning and continued by Jens Quorning. Jens Quorning is the principal designer for many modern Dragonflys and has developed the Swing‑Wing folding system that defines the marque. The 35 belongs to a lineage of Dragonfly designs that evolved through the late 1990s and 2000s; specific build dates and small detail changes varied between early runs and later “Ultimate” or updated versions.
Production was carried out at the Quorning yard in Skærbæk, Denmark. Over its life the model has been marketed in Europe, Australasia and North America through the yard’s dealer network and on occasion offered with factory options and fit‑out levels that affect tankage, deck hardware and interior joinery.
Construction and hull design
Construction uses proven GRP sandwich laminates with composite reinforcements in high‑load areas; higher specification hulls use vinylester and epoxy laminates in places to guard against osmotic blistering and to reduce weight. The amas are slender with fairly fine entries to reduce hobby‑horse and slamming in chop. The centre hull is longer relative to overall length than many cruising catamarans or small monohulls, which improves pitching behaviour and creates a more comfortable motion at sea.
The Swing‑Wing system employs robust hinge and folding structure mounted to the crossbeams; when folded the amas rest alongside the centre hull and the beam reduces to a dimension appropriate for standard marina berths. Keel arrangements on the 35 are centred on a deep lifting centreboard (centreboard or daggerboard variations may be fitted depending on year and specification) with a modest fixed stub keel/bilge that protects the board case and carries some ballast mass. Steering is via a transom‑mounted or stern‑hung rudder on the centre hull; the rudder is designed to remain effective at high speeds and when the boat is heeled very little (as trimarans rarely attain large angles of heel).
Specifications
Cockpit, deck layout and sail handling
The Dragonfly 35’s deck is arranged for both performance and safety. Wide trampolines forward and between the amas give large working and social areas, while the centre cockpit is sited to provide good sightlines to the sails and water. Deck hardware for halyards and control lines is typically routed back to the cockpit on later builds to facilitate short‑handed sailing; many boats have a self‑tacking jib or a roller furling headsail and a powerful, easily‑managed mainsheet system.
Winch placement and clutches are positioned for single‑hand or two‑hand operation — sheets and reefing lines are commonly led to the coachroof or cockpit coamings. The Swing‑Wing hinges and beams are engineered for repeated folding and include positive locks; the folding sequence is practical for a small crew but requires familiarisation and regular maintenance for safe, quick operation.
Access to the amas and crossbeams is straightforward, but stepping across trampolines in a seaway needs care. Boarding from a stern platform, where fitted, or from an amidships berth is simpler when the boat is at anchor or rafted. Many owners install outboard brackets on the stern or a small inboard for manoeuvring in tight marinas; the boat’s lateral control from the centreboard and rudder is effective at low speeds when driven carefully.
Interior and accommodation
The Dragonfly 35’s interior reflects its performance bias: centre‑hull volume is used to create comfortable berths, a functional galley and enclosed heads while keeping structure light. A typical layout includes a forward double berth in the centre hull, an amidships saloon with convertible seating and a compact aft sleeping area or storage. Heads and galley arrangements are sized for extended cruising, with sufficient stowage distributed about the centre hull.
Ventilation is through hatches and opening ports; because much of the accommodation is in the centre hull, natural ventilation and light are important considerations and were fitted progressively more generously in later builds. Storage is concentrated under berths and along the coachroof – owners trading off high performance for cruising comfort commonly specify more joinery, domestic systems and greater tankage at purchase or during refit.
Sailing and handling
Performance is where the Dragonfly 35 stands out. The narrow hulls and efficient rig allow the boat to accelerate quickly and maintain higher average speeds than an equivalent monohull, particularly off the wind. The trimaran platform keeps motion relatively level; unlike heavily heeled monohulls the 35 will run and accelerate with very little heel, giving a psychologically different and often more comfortable ride for many sailors.
Upwind, the lifting centreboard provides lateral resistance and can be adjusted to trim the helm and reduce leeway. The combination of a powerful main and smaller, easily handled headsail promotes short‑handed sailing capability. Downwind and reaching, the boat can be sailed fast with asymmetric spinnakers or reaching sails; care is needed with apparent wind angles and sail selection as multihulls accelerate rapidly and can exceed apparent‑wind‑control expectations.
Handling in chop is generally good because of slender ama forms and a long centre hull; however, slam can occur at high speeds in steep waves and should be managed by trimming sail area and reducing speed when sea state requires. The helm balance is typically neutral to slightly weather‑balanced when the board is correctly set and sails trimmed — owners report a lively, direct feel through the rudder rather than a damped, heavy helm.
Australian sailing uses and conditions
In Australia the Dragonfly 35 is well suited to a number of programmes: coastal passagemaking, sheltered to semi‑exposed weekend cruising, long‑distance coastal runs and inshore daysailing. Its shallow board‑up draught suits the tidal flats and sandbanks common in many Australian estuaries and allows beaching where monohulls might not venture. Fast coastal hops and island hopping in regions such as the Whitsundays, Bass Strait passages in settled conditions and sheltered bay cruising are all practical uses.
Offshore use is feasible for experienced multihull sailors who understand the boat’s behaviour in heavy seas. The 35’s motion and speed reduce exposure time offshore, but owners must pay attention to sail inventory, heavy‑weather reefing systems and safe loading because multihulls have different reserve buoyancy and motion characteristics than monohulls.
Principal strengths
- High performance: lively acceleration, impressive sustained speeds and efficient hull forms for coastal and passage sailing.
- Practical folding beam: Swing‑Wing system reduces berth costs and increases marina access compared with fixed‑beam multihulls.
- Shallow draught with centreboard up: access to shallow anchorages, tidal flats and more beaching options.
- Large deck and trampoline space: social areas for daysailing and easy crew movement for sail changes.
- Comfortable, relatively level motion underway compared with heeled monohulls — improves passenger comfort and watchkeeping.
Limitations and compromises
- Interior volume is concentrated in the centre hull and necessarily less than a same‑length catamaran or monohull of similar displacement; owners often accept a more compact galley and storage layout.
- The folding mechanism requires ongoing inspection, lubrication and possible periodic hardware renewal — advisable to budget for maintenance of hinge and beam bearings.
- At very high speeds in steep surf, dry‑stored items and poorly secured gear can be at risk; careful stowage and lashing practice is important.
- Multihull seamanship differs from monohull practice — yard recommends training and familiarisation for new owners, particularly in reefing techniques and heavy‑weather seamanship.
- Because stability is form‑based rather than ballast‑based, multihull capsize dynamics differ; owner training and prudent seamanship are essential for safe offshore use.
Ownership, maintenance and refit
Maintenance focuses on composite integrity, hinge and folding‑beam service, rigging inspection and centreboard case checks. Owners should routinely examine the Swing‑Wing bearings and locking pins for wear and corrosion, inspect core areas around chainplates and beam attachments for signs of water ingress, and check laminate blisters or repairs around heavy‑load fittings. Because a range of inboard and outboard propulsion options has been fitted across different boats, buyers should confirm engine access, shaft or bracket condition and fuel/water tank integrity on each example.
Refits commonly include sail inventory updates, replacement of deck hardware, upgrading to modern self‑tailing winches and investing in navigation and redundancy systems for offshore work. Corrosion‑prone items such as stainless fastenings, turnbuckles and hydraulic/servo systems for optional furlers should be examined and replaced as required. Re‑seating and bedding of deck fittings and regular checks of internal bonding at beam foundations will lengthen the service life of the structure.
What to inspect before buying
- Swing‑Wing structure: closely inspect hinges, locking mechanisms, beam laminates and any evidence of movement, fatigue or repair at the beam‑to‑hull interface.
- Centreboard and case: check for free movement, water ingress to the case, corrosion on moving parts and integrity of the board. Confirm draught figures and that the board locks positively.
- Laminate condition: look for osmosis blisters, repaired impact areas on amas and centre hull and consistent laminate schedules described in any owner or maintenance manuals.
- Rigging and spars: confirm age of standing rigging, mast fittings, track condition and halyard sheaves; check for rigging replacement records and inspect chainplates for core compression or leaks.
- Engine and propulsion: if an outboard is fitted, inspect bracket, mounting and transom; if an inboard engine is fitted, verify service history, access and shaft/propeller condition.
- Deck hardware: verify condition of winches, clutches, blocks and furling gear. Ensure sheets and control lines are led logically and check the condition of running rigging.
- Interior and systems: check for mold, water ingress in bilges, condition of plumbing and electrical systems and adequacy of tankage for intended cruising range.
Who this boat suits
The Dragonfly 35 is best for sailors who want a fast, sea‑kindly small trimaran that can be used for lively daysailing, coastal passages and serious offshore hops with a small, competent crew. It suits owners who value performance and folding‑beam practicality over maximum interior volume, and those prepared to maintain the mechanical complexity of a folding system and the specific demands of multihull seamanship.
It is particularly appropriate for couples or small families who cruise with an emphasis on distance and speed, sailors who want to explore shallow anchorages and islands, and experienced owners migrating from monohulls who desire greater speed and a different motion at sea. Less suited are sailors who need large saloon space for liveaboard year‑round cruising or owners unwilling to invest in ongoing inspection and structural care of the folding mechanism.
Sources consulted: dragonfly.dk, sailboatdata.com, cruisingworld.com, manualslib.com, tradeaboat.com.au
