The Farr 1104 was conceived during Bruce Farr’s prolific one‑tonner and fast cruiser era. It emerged as a relatively light displacement sloop with a fin keel and spade rudder, and a tall fractional rig that gave the hull more sail‑power than many contemporaries. That combination made the 1104 a competitive racer in offshore events such as the Sydney–Hobart and one‑ton circuits, while builders and owners adapted a small number for dual‑purpose coastal cruising by modifying deck mouldings, interior fit‑outs and tankage.
Today the model appears across Australian race fleets and in private ownership, most often retained by sailors who prize sharp upwind performance and a lively, responsive helm. The Farr 1104 is not a modern cruising catamaran nor a bluewater passagemaker; it is a seventies performance hull with compromises in interior volume, tankage and motion comfort compared with later cruising designs. Owners commonly update spars, rigging and electronics and attend to recurring age‑related maintenance like keel‑to‑hull joints and deck core checks.
Overview and design purpose
The Farr 1104 was designed as a performance cruiser/racer: a relatively light, easily driven hull with a fractional rig that could be driven hard under upwind and reaching sail plans. In the 1970s the design fitted the international one‑ton and handicap racing environment where owners wanted boats that could be competitive in offshore handicap racing without the cost of custom maxi campaigns.
Design features emphasise pointing ability, sail area to displacement and manoeuvrability rather than interior volume or heavy‑weather motion comfort. The 1104 succeeds where tight fleet racing and tactical sailing matter — short‑handed or fully crewed — but an owner looking for extended ocean voyaging would need to address tankage, redundancy and interior arrangement as part of a refit.
Designer, builder and production
Designer: Bruce Farr. Farr’s office was highly active in the 1970s producing light, competitive designs that reshaped offshore racing. The 1104 is one of Farr’s production/design numbers from that period and shares the design philosophy of light displacement, fine entry and powerful rigs.
Builders: multiple small yards in Australia and New Zealand constructed Farr 1104 hulls and variations. The model appears in the records as built by Australian yards including Holmes and Compass/Compass‑related builders for later iterations; some boats show later deck and interior follow‑on models marketed as Compass 1104 or Compass 36 where the hull moulds were modified with more cruising‑oriented decks.
Production period: first built in the mid‑1970s (sources record initial dates around 1975–1977). Exact production numbers and continuous build years vary by builder and country; the design was produced in small series rather than mass production and several extant boats show upgrades and owner modifications consistent with a patchwork production history.
Construction and hull design
Hull form: the 1104 is a relatively narrow, fine‑entry hull for its length with a moderate to low wetted surface and fine forward sections. Beam is modest by modern standards; this concentration of volume in the centre and aft sections gives the hull efficiency upwind and reduces hobby‑horsing at displacement speeds but produces less interior volume.
Keel and rudder: the standard arrangement is a fixed fin keel with substantial lead ballast and a spade rudder. The fin provides a low wetted area and an efficient centre of lateral resistance; the separate spade rudder keeps helm response direct. Owners should note this layout’s vulnerability in grounding impacts compared with full keel designs — inspection of keel bolts, keel‑to‑hull joints and rudder bearings is important on older boats.
Construction materials and method: hand‑laid fibreglass (glass‑fibre) hulls were the norm, often with solid laminate below the waterline and cored or reinforced decks. Ballast is reported as lead, bolted to the keel. Many original boats have since had reinforcements, keel‑joint repairs or deck refits carried out as part of late‑life maintenance programmes.
Specifications
Cockpit, deck layout and sail handling
Decks on original 1104s are uncluttered and biased toward racing ergonomics: clear coachroof lines, relatively narrow side decks and a cockpit sized to allow efficient crew movement and trimming. Cockpit coamings are typically higher than modern cruiser‑racers, providing secure seating for crew during offshore work.
Winches, clutches and traveller arrangements are owner‑dependent. As built, the 1104 carried a race‑orientated control layout: sheet leads traditionally run to cockpit winches, halyards and reefing lines led aft to clutches on the coachroof or cabin top, with primary winches sited within reach of the helm. Many boats have since been refitted with additional or relocated clutches and self‑tailing winches to make short‑handed handling easier.
Short‑handed handling: the fractional rig and large mainsail mean reefing systems and durable mast‑head hardware are essential for two‑handed sailing. Owners commonly fit slab or single‑line reefing and strengthen winches and clutch positions to allow the helm to manage sail changes without a full crew. An efficient furling headsail can make a big difference in local cruising use but alters the original racing sailplan and handicap characteristics.
Deck movement: narrow side decks and a higher coachroof mean careful footing is required when moving fore and aft in high seas. Stainless handholds, non‑skid upgrades and tidy halyard stowage reduce the risk of tripping on race hardware. Anchor lockers are typically forward; chain‑to‑warp arrangements should be inspected for chafe and snubbing points.
Interior and accommodation
Interior volume is modest compared with later cruising designs. The Farr 1104 was originally laid out to save weight and for racing practicality: simple, robust joinery, minimal locker volume and a focus on stowage for sails and safety gear rather than generous living spaces.
Typical layouts include a forward V‑berth, saloon with settees that double as sea berths, a small galley (usually to port or starboard near the companionway) and a heads compartment. Berth counts vary with owner conversion; many boats have bunks for a racing crew plus two‑berth forward accommodation for cruising. Ventilation is basic — opening hatches and dorade vents are common — and owners often upgrade fans and deck hatches when converting to coastal cruising roles.
Galley and heads: galley spaces are compact and optimised for short cruises or race catering: gimballed stoves and compact sinks are typical. Water and fuel tanks may be undersized for long coastal passages, so cruising modifications often include increasing tank capacity or adding jerry can stowage in lockers.
Storage and liveability: dedicated sail lockers and under‑berth space are generous for a boat this size, a concession to its racing role. Liveability for extended cruising requires thoughtful refits — additional shelving, more extensive galley fittings and improved headroom (where possible) make the 1104 more comfortable ashore and at anchor.
Sailing and handling
Performance character: the Farr 1104 is lively and responsive. Light displacement and a high sail‑area‑to‑displacement ratio give it brisk acceleration and the ability to maintain speed in light airs better than many heavier contemporary cruisers. The hull’s fine forward sections and efficient keel/rudder make pointing and windward work a strength.
Balance and helm: the fractional rig produces a powerful mainsail and smaller headsail compared with masthead rigs, making depowering and sail balance easier by reefing the main. The spade rudder and low wetted area provide a positive, direct helm but can be sensitive; at heel angles the boat rewards active trimming to keep helm neutral.
Comfort and seakeeping: in moderate offshore conditions the 1104’s hull tracks well and carries speed through waves. Its lighter displacement and narrower beam translate to a livelier motion in a short, steep chop — owners report a more active ride than heavier cruisers. Downwind the design benefits from asymmetric or symmetric spinnakers but requires attentive trimming to avoid broaching in strong gusts.
Manoeuvrability: tacking and gybing are straightforward; the low inertia of the hull helps quick course changes. In tight marinas the light displacement and inboard diesel give adequate control, though older boats may lack modern bow thrusters and rely on skillful use of engine and helm.
Australian sailing uses and conditions
Club racing: the Farr 1104 remains a favourite in Australian club racing and handicap fleets where its upwind performance and nimble handling are assets. Boats that retain racing spars and sail inventories can be competitive in local regattas and coastal races under appropriate handicaps.
Offshore and coastal cruising: many Australian owners use the 1104 for coastal and short‑offshore trips. The boat’s seaworthiness for passages such as Tasmanian coastal runs or Sydney‑Hobart starts is proven by historical entries; however, owners should ensure tankage, safety equipment and accommodation modifications are made for comfort and compliance with offshore safety regulations.
Trailer or inshore use: the Farr 1104 is not a trailer sailer. Its fixed keel and displacement require crane or slipway launching; the design is best kept in a marina or stored on appropriate cradles ashore.
Principal strengths
- Strong upwind performance and pointing due to fine hull entry and efficient fin keel.
- Light displacement gives brisk acceleration and good speed in light airs compared with heavier designs of the era.
- Fractional rig allows nuanced sail balance and effective depowering via reefing the main.
- Proven offshore racing pedigree — successful in club entries and historic offshore races.
- Relatively straightforward systems: mechanical simplicity appeals to owners who prefer hands‑on maintenance.
Limitations and compromises
- Limited interior volume and headroom compared with later cruising designs — less comfortable for extended live‑aboard use without refit.
- Original tankage and systems are modest; owners often upgrade fuel, water and electrical systems for coastal cruising.
- Older fibreglass construction can hide age‑related issues: deck core rot around fittings, osmosis blisters or weakened keel‑to‑hull joints require careful inspection.
- Spade rudder and fin keel are more vulnerable to impact than full keels; grounding damage can be costly.
- Side decks are relatively narrow and deck movement on ocean passages requires careful planning for safe crew work.
Ownership, maintenance and refit
Maintenance priorities for a 1970s Farr 1104 reflect age and use. Corrosion‑sensitive items such as keel bolts, through‑bolts and chainplates should be inspected regularly and replaced if pitting or crevice corrosion is found. Older deck fittings often are bedded in non‑breathable sealants that can trap moisture — a sensible refit program inspects deck cores around chainplates, winch bases and stanchion sockets and repairs or replaces with modern bedding systems where required.
Rigging: standing rigging in original boats is likely decades old and should be replaced on age or condition regardless of appearance. Mast step and compression post areas deserve attention for signs of movement or past repairs. Many owners have upgraded spars to aluminium or composite sections and fitted modern running rigging, halyard organisers and small‑boat furlers to make the boat manageable short‑handed.
Systems upgrades commonly carried out include: fuel and water tank replacement or enlargement; adding modern 12‑volt charging, battery banks and solar panels; upgrading navigation and communications electronics; and improving galley appliances and refrigeration for cruising comfort. For owners wanting serious offshore capability, secondary bilge pumps, redundant navigation lights and modern EPIRBs/PLBs are recommended additions.
What to inspect before buying
- Hull: check for osmosis, significant gelcoat cracking and evidence of major repairs. Surveyors should core‑sample suspected delamination or soft spots.
- Keel and keel bolts: exam for pitting, re‑bedded joints, movement or historical repairs; request records of keel removals or re‑bonding work.
- Deck core and fittings: inspect around mast step, chainplates, winch bases and stanchion sockets for softness or moisture infiltration.
- Rigging and spars: obtain age and replacement history of standing rigging; check mast and chainplate integrity and look for over‑bending or compression evidence at the mast step.
- Rudder stock and bearings: the spade rudder bearing area is a potential wear point — survey for play, corrosion and repairs.
- Engine and tanks: service history for the auxiliary diesel, fuel filters, tank condition and plumbing; verify water tank capacity and condition if planning cruising.
- Sails and running rigging: confirm condition and age of mainsail, headsails and any spinnakers; replacement sail costs should be budgeted for if racing capability is important.
- Safety equipment: check for up‑to‑date EPIRB/PLB, lifejackets, flares and offshore safety compliance if the intended use includes coastal passages.
Who this boat suits
The Farr 1104 suits sailors who prioritise performance and race capability in a boat that is small enough to manage yet big enough for serious offshore events. It will appeal to club racers, owners who enjoy short‑offshore adventures and sailors who value hands‑on maintenance and sensible refit projects over turnkey cruising comfort.
It is less suitable for buyers who want generous live‑aboard accommodation, long‑range bluewater independence out of the box, or those who require a forgiving motion in confused seas; for these uses a heavier‑displacement cruiser or a more modern hull form will be more comfortable without extensive modification.
For couples or small crews planning coastal cruising, an upgraded 1104 with improved tankage, modern electrics and sail‑handling aids (furlers, better clutches, power winches) can be a rewarding and surprisingly quick platform — provided the buyer budgets for the structural and systems work older boats commonly need.
Sources consulted: sailboatdata.com; farrdesign.com; sail listings and Australian race programmes/archives (boatsonline listings and Sydney‑Hobart race materials)
