The Hick 35 is a small, performance-focused monohull conceived and built in Australia in the late 1980s and early 1990s. With a relatively narrow waterline, deep fin keel and spade rudder, the boat was intended to deliver competitive corrected-time results under prevailing offshore rating rules of the era while remaining manageable for small crews. In Australian waters the type has been campaigned in inshore club racing, offshore races including the Sydney–Hobart, and as a coastal cruising platform when suitably equipped.
The boat’s reputation rests less on head-turning creature comforts than on seagoing manners: a robust hull and racing-orientated deck plan, conservative but effective underwater profile and a no-nonsense interior that prioritises weight control and storage for sails and race gear. Owners commonly refit systems and accommodation to suit a particular balance between racing performance and weekend cruising liveability.
Overview and design purpose
Robert Hick designed the Hick 35 as a performance cruiser-racer that would be competitive under the rating rules current at the time while still being usable for coastal cruising. The brief favoured a light, stiff hull and efficient underwater shape over wide-beam cruising comforts. Designers of this type aim to create a boat that accelerates quickly, points reasonably well and can be driven hard off the wind without excessive hobby-horsing.
That purpose shaped the trade-offs seen in the boat: a relatively deep fin keel and modest beam deliver good righting moment for ballast carried low, and the spade rudder gives responsive helm feel. Internally, accommodations are straightforward rather than luxurious because the priority was saving weight and keeping ballast and stores low and central for performance.
Designer, builder and production
The Hick 35 was designed by Robert (Bob) Hick, an Australian naval architect and builder known for lightweight, performance-orientated designs. Hulls were built in small numbers rather than as large-scale production runs — boats are best described as semi-production or custom one-offs sharing a common hull form and arrangement. This explains the range of fit-outs and refit levels seen among examples in Australia.
Several Hick 35s have a documented racing history with Australian yacht clubs and have been campaigned in events such as the Rolex Sydney–Hobart Yacht Race and regional offshore series. One of the most widely known examples is AFR Midnight Rambler, which achieved overall corrected-time success in the 1998 Sydney–Hobart — an outcome that emphasised the design’s offshore capability despite its modest length.
Construction and hull design
Construction across the type favours hand-laid fibreglass (GRP) with local reinforcements around chainplates, mast step and keel attachments; earlier boats used polyester laminates and later refits sometimes included structural strengthening or internal grid updates. Owners and brokers describe the hull as robustly built for a performance boat of its era but not over-engineered for long-term cruising comfort.
Key hull characteristics:
- Deep fin keel carrying ballast low to give a relatively high ballast-to-displacement ratio for a 35ft boat. This helps stiffness and upwind performance but increases draught compared with some contemporary cruiser designs.
- Moderately narrow beam relative to modern cruiser-racers; narrower sections help reduce hobby-horsing and improve upwind pointing but reduce initial form stability and interior volume.
- Spade rudder (single) giving direct helm response; the rudder is vulnerable to grounding damage like any unprotected spade arrangement, so inspection of the rudder stock and bearings is important when buying used.
- Hull-to-deck join and keel-bolt details vary between boats; some owners report bolted keels with through-bolts and backing plates, which is typical of the type, while refits have occasionally upgraded fastenings and corroded keel-bolt replacements.
Specifications
Cockpit, deck layout and sail handling
The deck layout of the Hick 35 reflects its racer-cruiser pedigree. Cockpit ergonomics favour short-handed racing and crewed offshore work rather than day-cruising luxuries. Winch placement, sheet leads and traveller positions are typically arranged for efficient trimming and quick sail changes.
Practical features and typical arrangements include:
- Large, deep cockpit with good drainage and secure seating for crew on races; cockpit is functional rather than sociable for recreational cruising.
- Multiple primary and secondary winches to control halyards and sheets. On many boats primary winches are placed on the coachroof coamings or inboard of the traveller for single- or short-handed trimming.
- Backstay or jumper-stay arrangements for mast support (set-up varies according to refit and sail plan). Some boats have been upgraded to modern rod rigging or adjustable backstays for better mast control under load.
- Halyard and control runs often led aft to the cockpit for short-handed operation — a common upgrade on older boats to improve safety and reduce the need for crew to go forward at sea.
- Deck hardware tends to be racing-grade but can be a mix of vintage and newer fittings depending on owner refits; check condition of winches, clutches and turning blocks when evaluating a used boat.
Interior and accommodation
Interiors are pragmatic and lightweight. Expect minimal joinery compared with production cruisers of similar length, reflecting the weight-conscious design objectives. Layouts vary between hulls because many were completed to owner specifications.
Common interior elements:
- Forward V-berth that converts to a small cabin space; limited stowage beneath the berth for sails or equipment.
- Saloon with settees that double as sea-berths; table often small or folding to save weight and space.
- Compact galley suitable for basic cooking; many racing-focussed owners fit minimal stoves and rely on portable solutions.
- One heads compartment positioned aft of the forward cabin or to port near the companionway depending on the builder’s layout choice.
- Ventilation is adequate with opening hatches and dorade vents on many boats, but interior comfort for extended cruising will depend on upgrades such as additional opening ports, fans or canvas enclosures.
Because each hull may have a different fit-out, prospective buyers should examine individual joinery, bilge accessibility and the quality of any structural modifications introduced during refits.
Sailing and handling
On the water the Hick 35 is typically lively and responsive. The combination of a relatively deep fin keel and spade rudder yields a nimble helm and good acceleration out of tacks. The hull’s narrower sections help the boat cut through waves rather than slap, which aids pointing and comfort in a seaway.
Performance characteristics and handling notes:
- Upwind: The boat points well for its hull length and carries sail area efficiently. Heel angles are moderate because ballast is carried low, but initial stability is lower than a modern wide-beam cruiser so weight placement matters.
- Reaching and running: The boat accelerates quickly and performs well on off-wind legs, particularly when crew manage trim actively. A symmetric spinnaker or modern asymmetric with pole arrangements is typical for racing inventory.
- Heavy-weather behaviour: Although relatively small, several Hick 35s have an offshore track record. The type’s seagoing manners in a seaway are generally described as capable provided the boat is well-found and crewed sensibly — but like all 35ft boats, they demand careful seamanship in heavy conditions.
- Short-handed sailing: Many owners have adapted control runs and reefing systems to improve safety for short-handed cruising. With foresail furling and halyards led aft, the boat can be managed by a small crew; however, heavier weather sail and reefing options need to be considered when planning offshore passages.
Australian sailing uses and conditions
In Australia the Hick 35 has seen wide use as a club racer and as a capable coastal/offshore contender. The type’s offshore successes, most notably in the Sydney–Hobart, demonstrate it can be campaigned successfully in demanding conditions. The boat is well matched to the variable sea states of Australia’s east coast: it is nimble enough for inshore courses yet solid enough for overnight offshore work when properly prepared.
Typical uses include:
- Club racing under IRC/handicap systems, where light displacement and tuned sail inventories are advantageous.
- Offshore race campaigns with weather-tight preparations and modernised safety systems.
- Coastal cruising and family weekends when owners refit interiors for greater comfort and add cruising tankage and systems.
Principal strengths
- Performance: A carefully balanced hull, low ballast centre and responsive steering make the Hick 35 competitive in mixed-fleet racing and lively to sail.
- Proven offshore capability: Documented race results and proven Sydney–Hobart participation show the type can handle serious offshore conditions with appropriate preparation.
- Customisability: Because many boats were built in small numbers and finished to owner requirements, prospective buyers can find hulls already set up for either racing or cruising and can refit to suit their program.
- Trailerable footprint: At 35ft the hull is still manageable for owners with marina space constraints compared with larger offshore racers; trailering is possible only with specialist equipment and is not typical.
Limitations and compromises
- Interior volume: Narrower beam and racing-focused joinery mean less living space and storage compared with contemporary cruising 35ft designs.
- Draught: Deep fin keel improves performance but restricts access to shallow anchorages and some coastal destinations unless a shoal-draught variant exists for a particular hull.
- Ageing systems: Original deck hardware, rigging, engine installations and electrics may be decades old and often require replacement or significant refit for safety and reliability.
- Spare-part rarity: As small-run boats, original parts or dedicated class equipment may be harder to source than for mass-produced designs; owners commonly adapt modern hardware during refits.
Ownership, maintenance and refit
Ownership of a Hick 35 typically involves active maintenance and periodic refits to remain competitive and seaworthy. Common maintenance and upgrade areas include standing and running rigging, keel-bolt inspection and possible replacement, engine servicing or repower, and replacement of deck fittings and winches.
Refit considerations:
- Rigging: Ageing rod or wire rigging should be professionally inspected and often replaced; many owners upgrade to modern rod or Dyform-style standing rigging and improve halyard leads for safety and mast control.
- Keel and hull: Verify keel-bolt condition and look for signs of water intrusion or corroded fastenings around the keel-hull joint. Laminate checks for core rot, blistering or osmosis are standard on older GRP boats.
- Engine and drive train: Engines fitted when boats were new may be at end-of-life; saildrives have become a common refit choice for improved shaft alignment and reduced vibration, but each option has maintenance trade-offs.
- Sail inventory and deck gear: Modern sailcloth and hardware bring performance gains; owners often invest in new sails, spinnakers and upgraded winches/clutches to regain competitive edge.
What to inspect before buying
Because many Hick 35s are unique builds or have undergone significant refits, a thorough pre-purchase inspection is essential. Key, model-specific points to examine:
- Keel-bolts and keel-to-hull joint — check for corrosion, evidence of previous repairs and a sound backing structure. Any sign of movement, rust staining or repairs should prompt a professional survey and possibly ultrasonic or boroscope inspection.
- Rudder stock and bearings — because the boat uses a spade rudder, assess stock condition, bearing wear and any history of grounding repairs.
- Rig and mast step — check for signs of compression, chainplate condition and secure attachment of standing rigging. Verify dates on standing rigging and consider replacement if older than recommended service life.
- Hull laminate and osmosis — inspect through-hull fittings, transom fittings and the general condition of the gelcoat. Look for blistering, delamination or evidence of previous structural repairs.
- Engine hours and service history; look for leaks, mounts condition and exhaust system integrity. If the boat uses a saildrive, inspect bellows and seals.
- Electrical and safety equipment — verify batteries, charging systems and compliance of safety equipment with intended usage (offshore vs inshore). Older installations often need rewiring or modern battery management systems.
- Sail condition and inventory — confirm the age of mainsail, headsails and the presence/condition of spinnakers. Racing boats often have many sets; cruising buyers may prefer fewer, newer working sails.
Who this boat suits
The Hick 35 suits sailors who prioritise performance and offshore capability in a compact, easily handled hull. It will appeal to owners who race regularly under IRC/handicap systems and want a boat that is nimble and responsive yet proven in offshore situations. It also fits owners who enjoy coastal cruising but are prepared to accept trade-offs in interior comfort for lighter displacement and better sailing performance.
Ideal owners will be hands-on with maintenance or willing to budget for refits of rigging, engines and deck gear. Sailors seeking a weekend cruiser with spacious cabins and shallow draught will likely find the Hick 35 less comfortable than modern 35–36ft cruisers optimised for liveability.
Sources consulted: sailboatdata.com, boatsonline.com.au, cruisy/yacht-club and regional race records (cyca.com.au), mysailing.com.au, hallettboatbrokers.com.au
