The Hood 23 is a small, general‑purpose monohull that occupies the classic Australian niche of affordable family cruising and club racing. Its hull dimensions and ballast proportions give it a relatively stiff, stable feel for a boat of its size, while the masthead sloop rig keeps sail handling straightforward for short‑handed crews. Over the decades the boat developed a modest enthusiast following in Australian waters because it combined simple systems and a roomy accommodation plan for a 23‑footer.
The design was introduced in 1966 and is most closely associated with its Australian builders, including Hood Boating Company and later Stoddart Brothers Marine; Warwick Hood is credited as the designer. Builders produced a number of variants during the late 1960s and 1970s — raised‑deck coach roof, standard coach roof, pop‑top and shoal‑draft or swing‑keel versions — and those variants change practical attributes such as internal headroom, centre‑of‑gravity and ability to launch from a trailer or sit on a swinging mooring.
Overview and design purpose
The Hood 23 was conceived as a compact, economical cruiser that could be raced at club level or sailed comfortably by a couple or small family. The overriding brief is practical versatility rather than high‑performance racing or extended ocean voyaging: short‑handed coastal cruising, bay sailing and weekend passages were the intended uses. The masthead sloop rig provides a simple headsail plus mainsail combination that is familiar to most sailors and easy to reef or reduce for stronger winds.
On the water the hull form favours a moderate displacement and a relatively narrow beam by modern standards, which produces a seaworthy motion and reasonable pointing ability. Designers and early marketing emphasised liveability for a small hull — standing headroom where provided by raised‑deck or pop‑top models, an enclosed heads option and a usable galley — while keeping construction and equipment costs low.
Designer, builder and production
Warwick Hood is the credited designer. Production began in the mid‑1960s and early boats carried the Hood Boating Company name. The bulk of subsequent production is associated with small Australian yards such as Stoddart Brothers Marine, and tooling and builds were sporadic rather than continuous; later advertisements and dealer sheets show the model selling through Australian brokers during the 1970s.
Because production occurred in small batches and several builders produced differing decks and keel options, the Hood 23 is best understood as a family of closely related variants rather than a single strictly uniform model. That was common for trailer‑capable cruisers of the era: hull moulds were retained while topsides, coach roofs and keel arrangements were varied to suit customer demand or builder capability.
Construction and hull design
Construction is hand‑laid fibreglass (glass‑reinforced plastic) with a lead ballast encapsulated or bolted to the keel depending on the keel variant. The hull uses a fin keel and spade rudder arrangement on the original deeper‑draft boats, while shoal draft or swing/retractable keel versions exist and change the underwater profile significantly.
Hull lines are relatively fine forward with a modest beam (just under 2.4 metres) that keeps wetted surface and pitching moderate in a seaway. The keel is a separate fin on the deeper‑draft versions; some boats were built with a swing or lifting keel for easier launching and shallow‑water capability. The skeg is not a feature of the original layout — directional stability is provided primarily by the fin keel and rudder balance rather than a long keel or heavy skeg.
Decks and coach roof details vary between raised‑deck, standard coach roof and pop‑top versions. Raised‑deck boats gain internal volume and headroom at the cost of a higher freeboard and small changes in windage; pop‑tops provide temporarily expanded cabin height for anchoring or harbour living. Hardware and deck fastenings are typical of the era: through‑bolted winches and cleats with bedding compounds, and deck‑stepped masts in most examples.
Specifications
Cockpit, deck layout and sail handling
The cockpit on deep‑keel examples is modestly sized and arranged for a small crew: wheel or tiller steering is typical but most surviving boats use a tiller, which frees cockpit space and reduces mechanical complexity. Decks are functional rather than luxurious, with basic non‑skid surfaces and through‑bolts for primary cleats and winches. Raised‑deck and pop‑top versions often have a slightly different cockpit coaming and toerails; layout depends on builder and refit history.
Sail controls were simple from new: halyards and sheets leading to the mast partner and cockpit, with primary winches on the coach roof or coamings. Because the rig is a masthead sloop, headsail changes are the principal way to depower: reefing the mainsail, hanked‑on or roller‑foiled headsails and a modest storm jib were the traditional arrangement. Short‑handed sailing is straightforward provided the boat has been updated with efficient leads, a reefing system and serviceable winches. Some owners have fitted modern roller‑furling headsails and slab‑reefing mains for safer single‑handed work.
Deck ergonomics favour straightforward movement fore and aft; handholds and foredeck cleats are usually simple and robust. Boarding and dinghy handling at anchor are manageable from the transom or swim ladder where fitted — many boats have been retrofitted with small outboard wells or bracket mounts.
Interior and accommodation
Interior layouts vary with coach roof style but share a compact, efficient plan: forward V‑berth, central saloon with two settee berths (which double as seating and dining), a small galley often to one side of the companionway and a portable or fitted marine toilet in a forward or amidships locker. Headroom depends heavily on whether the hull has a raised deck or pop‑top; standard coach roof boats will feel snug for standing adults, whereas raised‑deck and pop‑top boats offer usable headroom for cruising comfort.
Storage is reasonable for a boat of this size when the accommodation is lightly used — lockers under berths, shelf space in the saloon and an anchor locker forward. Freshwater capacity and galley equipment were typically owner‑specified: simple twin‑burner stoves, a small sink with a hand pump and a portable icebox were common original fits. Ventilation is adequate when hatches and ports are opened but is limited compared with modern designs; owners commonly fit additional opening hatches or dorade vents when refitting for regular cruising.
Sailing and handling
On the water the Hood 23 feels like a well‑weighted small cruiser: relatively stiff because of a high ballast ratio, with a comfortable motion in short to moderate seas. The fin keel and spade rudder combination gives reasonably crisp manoeuvrability and acceptable pointing; the boat tracks well but will not have the directional steadiness of a full‑keel cruiser. The displacement and sail area produce modest acceleration — the boat is not a dinghy‑like sprinter but is responsive to sail trim and weight distribution.
In stronger winds the masthead rig means headsail management is key. Reducing headsail area or switching to a smaller jib early keeps heel and weather helm under control. The boat’s ballast ratio contributes to a prompt righting tendency that many owners describe as reassuring; nevertheless, the Hood 23 is not designed for blue‑water ocean voyaging and heavy offshore conditions will test its motion and seaworthiness beyond the coastal role for which it was intended.
Manoeuvres under power and sail are straightforward for a small crew. Docking is aided by the boat’s moderate wetted surface and stern‑mounted outboard or small inboard in many examples. Reverse thrust from an outboard is more limited than a shaft inboard, so close‑quarters work requires planning and, ideally, an experienced helmsman or crew member on the bow lines.
Australian sailing uses and conditions
In Australian waters the Hood 23 has been used extensively for bay and coastal sailing, club racing and short family cruises. Its shallow‑water variants and swing‑keel examples make it attractive on shallow east‑coast harbours, river systems and for owners who need to trailer, launch from ramps or beach the boat temporarily. The raised‑deck and pop‑top models suit live‑aboard weekends or extended summer cruising in sheltered waters.
Because the boat was built in Australia and many examples remain in local ownership, spares and local knowledge are often easier to find than for imported models; owner groups and class associations have historically shared advice on rigging, refits and performance tuning. For coastal cruising in typical Australian conditions — variable sea breezes, protected passages and short overnight legs — the Hood 23 is practical and economical. For prolonged heavy weather passages or offshore blue‑water racing it is not recommended without significant rework and equipment upgrades.
Principal strengths
- Affordability and availability of second‑hand hulls in Australia: the design was produced in reasonable numbers and often sells at modest prices compared with larger cruisers.
- Versatility: variants include raised‑deck, pop‑top and shoal/swing‑keel versions that suit different local needs (headroom, shallow water, trailering).
- Stiffness and initial stability: a high ballast ratio produces a reassuring feel under sail and good self‑righting tendency for coastal conditions.
- Simple rig and systems: easy for owners to maintain or upgrade incrementally; conventional masthead sloop layout is familiar to most sailors.
- Practical accommodation for weekend cruising: four berths, basic galley and enclosed toilet options make the boat usable for family weekends.
Limitations and compromises
- Age and variation: boats were built by several small yards with differing specifications; older GRP construction, deck fittings and through‑bolts may need attention and vary significantly hull‑to‑hull.
- Limited headroom in standard coach roof models: raised‑deck or pop‑top versions are preferable for liveability but are less common.
- Not optimised for offshore ocean passages: the boat’s systems, tankage and seakeeping were intended for coastal use rather than long blue‑water voyaging.
- Engine arrangements vary: many boats have aftermarket outboards or converted inboards; buyers must verify actual installation, shaft condition, mounts and controls rather than assuming a standard fit.
- Sailing performance is modest compared with modern 23‑foot racers: the hull balances comfort and speed rather than pure performance.
Ownership, maintenance and refit
Owning a Hood 23 is typically economical but demands attention to age‑related issues. Common maintenance items include checking deck‑to‑hull joints and bedding for leaks around stanchions and winches, inspecting keel bolts and the ballast keel‑to‑hull interface (especially on older boats where the keel was bolted rather than encapsulated), and assessing the condition of the rudder stock. Bilge and structural surveys should focus on core degradation around fittings and the transom in boats that have been left on moorings.
Refit work often performed by owners includes updating sail controls to modern leads, fitting roller‑furling headsails and slab‑reef systems, re‑rigging with new standing rigging if original wire is aged, and installing modern electronics and safety gear for coastal cruising. Interior upgrades commonly improve freshwater capacity, refrigeration (portable systems) and ventilation via added opening hatches.
What to inspect before buying
- Keel and keelbolts: verify the type (bolted or encapsulated lead). Look for corrosion, hairline fractures in the keel flange and any signs of previous keel repairs.
- Deck‑to‑hull joints and bedding: check around stanchions, winches and cleats for soft spots, osmosis or delamination.
- Standing and running rigging: replace standing rigging older than 10–15 years; check chainplates for corrosion or packing failures.
- Rudder stock and tiller/pintle fittings: play in the rudder bearings is a common wear item and can be expensive to rectify.
- Interior moisture and rot: although GRP hulls do not rot, joinery and plywood cores under floorboards or in cabinetry can degrade if water ingress occurred; inspect for soft patches and odour.
- Engine installation and steering linkage: confirm condition and service history of any fitted outboard or inboard, and check propeller shaft metallurgy and coupling if fitted.
- Variant‑specific checks: on swing or lifting keel examples, inspect the lifting mechanism, pivot bearings and seizing of the keel trunk; on pop‑top or raised‑deck boats, check the pop‑top seals and hinges carefully.
Who this boat suits
The Hood 23 is best for sailors who want an economical, easily maintained small cruiser that can be campaigned for club racing or used for short coastal trips and weekend live‑aboard escapes. It appeals to couples or small families who value simplicity, trailering or shallow‑water capability (in shoal/swing‑keel variants) and who are prepared to invest in updating systems and rigging where necessary. It also suits owners who enjoy hands‑on maintenance and refit projects: many surviving examples have been improved progressively by enthusiastic owners rather than being sold as factory‑fresh boats.
The boat is less suitable for sailors requiring extensive standing headroom in all conditions, those planning long offshore passages without major modifications, or buyers seeking turn‑key, modern performance in a new‑type 23‑foot cruiser.
Sources consulted: sailboatdata.com; mysailing.com.au; boatsector.com; sailboatlab.com; seabreeze.com.au
