The Lagoon 50 is a purpose‑built cruising catamaran that aims to deliver spacious accommodation, a stable platform and comfortable passage‑making at moderate speeds. Its design reflects the recent generation of production cruising cats: broad beam for living space, a bridgedeck and coachroof layout that raises the saloon and provides long forward glazing, and a deck plan that keeps the helming and sail controls within easy reach of a small crew.
For Australian owners the Lagoon 50 is commonly seen in coastal cruising, extended coastal passagemaking and in the larger charter market. The layout options — typically three, four or five‑cabin schemes with owner versions — make the 50 flexible for private ownership or commercial use, while the construction and systems suit those who value relatively low operating complexity and dealer support in key cruising regions.
Overview and design purpose
The Lagoon 50 was conceived as a comfortable long‑distance cruising platform where liveability and ease of use are priorities. Designers kept the sailing systems straightforward so owner‑operators can manage passages with a small crew. The boat follows Lagoon’s prevailing design language: wide beam for large cockpit and saloon volumes, a bridgedeck saloon with panoramic glazing and a flybridge option for a raised helm and social space.
Market position is unashamedly luxury cruising rather than performance racing. The 50 targets owners who want yacht‑style interior comfort in a production catamaran, for blue‑water capability tempered by predictable handling and modern systems. It also appealed to the charter sector because the variants balance guest accommodation with practical serviceability.
Designer, builder and production
The naval architecture is by VPLP, a design practice widely used by production multihull builders. Interior design work and styling influences come from Nauta Design, with exterior lines refined under Lagoon’s design direction. The Lagoon 50 is manufactured by Lagoon (part of Groupe Beneteau) at their Bordeaux facility and elsewhere within the company’s production network.
The model was launched in 2018 and carried through the late 2010s into the early 2020s. During that period Lagoon offered several interior layouts and optional equipment packs targeting owners and charter operators alike. Production examples have been sold into Australia either directly or via transport/shipping from Europe, and a number of boats have entered Australian waters.
Construction and hull design
Construction follows Lagoon’s standard production methodology for composite production catamarans. Hulls and bridgedeck mouldings are hand‑laid or infused GRP with reinforcing structures at high‑load areas. The bridgedeck is raised to improve interior headroom and visibility from the saloon while limiting slamming in a seaway; appendage and structural design reflect the trade‑offs between lightness and robust reefing, engine mounts and keel loads.
The hull form is a relatively fine, slightly raked bow progressing to broad, voluminous sections aft — typical of contemporary cruising cats where internal volume and load‑carrying are priorities. Keels are fixed shallow bulbs integrated into the hulls, giving a modest draught suitable for many anchorages and coastal cruising areas. Rudders are transom‑mounted, balanced spade types designed to give good control and redundancy for each hull.
Specifications
Notes on specifications: The figures above reflect factory standard specifications for the Lagoon 50 and published technical sheets; individual boats may vary according to option packs, owner refinements and market‑specific installations. Dimensions and tankage are manufacturer‑level figures and may be presented in different units by third‑party listings.
Cockpit, deck layout and sail handling
The cockpit is a primary social space with direct connection to the saloon via large sliding doors; the aft transom typically folds down to create a swim platform and tender boarding area. Two major deck configurations exist: a coachroof‑level saloon with either a hard top flybridge (raised helm and social area) or a coachroof helm. The flybridge option provides a protected, elevated helm with excellent visibility for harbour manoeuvres and offshore lookout.
Sail controls are arranged for short‑handed operation: sheet leads, halyards and reefing lines are brought within reach of the helm(s) or a central winch bank depending on the chosen deck layout. Many production boats have an electric winch option and foresail furling as standard, which simplifies sail handling for an owner‑driver. The mainsheet is often led to the flybridge or to a centralised traveller on the aft coachroof depending on the configuration.
Deck ergonomics favour wide sidedecks and obvious handholds; the coachroof has long glazing to the forward saloon giving excellent visibility. Access to the foredeck is straightforward via flush‑fitted lounging areas and steps, although like many large cruising cats, step‑wise movement forward in offshore conditions remains a task that benefits from caution and tether usage.
Interior and accommodation
Interior space is a distinguishing feature. The Lagoon 50’s saloon is bright and airy with panoramic windows and a raised seating area; the open layout blends galley, saloon and navigation station into a large communal zone. Nauta Design’s interiors give a modern yacht aesthetic: light timbers, clean joinery lines and large volumes for cabins and heads.
Layout options include an owner’s version with forward owner’s suite in one hull and guest accommodation in the other, or balanced owner/guest arrangements for charter use with multiple en suite cabins. Galley positions vary by configuration: a forward or aft galley may be specified, each with generous refrigeration, bench space and locker volume. Heads typically have separate showers, and ventilation is provided through hatches, dorade vents and the long saloon glazing.
Storage is a strong point compared with monohulls of similar LOA: the broad hull sections allow large locker space, hanging lockers and lazarette volume for spares and cruising gear. Service access to engines and major systems is reasonable — engines sit in each hull beneath companionways with bilge and access panels — but complexity rises with larger option lists (air‑conditioning, watermakers, inverter systems) so layout during purchase should anticipate maintenance paths.
Sailing and handling
On passage the Lagoon 50 behaves as a modern cruising catamaran: comfortable and stable, with moderate hull‑speeds and the ability to maintain good average passage speed without aggressive sail plans. The relatively fine bows help reduce hobby‑horsing in a head sea compared with earlier ultra‑full bows, while the broad sterns and generous sail area produce steady power on reach and downwind points of sail.
Balance tends to be neutral to slightly weather‑ward depending on sail trim and reefing. Dual rudders provide positive steering control and redundancy; twin engines make close manoeuvring and tight marina handling manageable for a single helmsman with bow thruster options further easing berthing. Reef early — as with all multihulls — to maintain control and comfort, because they accelerate quickly when overcanvassed.
Performance expectations should be pragmatic: the 50 is not a light‑displacement racer but will reach well on off‑wind sails and produce efficient passage averages on trade wind or coastal runs. Short‑handed setups, furling headsails and electric winches are important options for owners planning extended cruising without large crews.
Australian sailing uses and conditions
For Australian conditions the Lagoon 50 suits coastal cruising, extended coastal passages between populated ports and sheltered offshore trips in favourable weather windows. The shallow draught helps access many Queensland and tropical anchorages and Tasman Bay coves, but owners should be mindful of tropical squalls, strong tidal streams and exposed weather systems during off‑season passages.
In southern Australian waters and Bass Strait passages, owners will need to respect colder, shorter weather windows and heavier sea states: the boat can handle open water passages but planning and conservative weather routing are essential. The 50’s comfort and living volume make it attractive as a liveaboard for families or owner‑operators who intend to cruise for extended seasons in Australia’s wide cruising grounds.
Principal strengths
- Large, well‑appointed living areas — excellent for liveaboard cruising and entertaining.
- Flexible interior layouts that suit owner‑operators or charter use.
- Deck plan and sail handling options designed for short‑handed operation.
- Shallow draught enabling access to a wide range of anchorages common in Australia.
- Strong dealer and service network through Lagoon’s global network — helpful for owners in remote cruising areas.
Limitations and compromises
The design choices that create the 50’s living comfort also bring compromises. The wide beam and heavier displacement relative to performance cats limit windward pointing ability and acceleration; the boat will not match lighter contemporary performance multihulls in sportier conditions. The high accommodation volume means higher windage in strong conditions, and the bridgedeck area — while offering more headroom — needs careful trimming when heavy seas and down‑funnel slamming are present.
Operationally, large production cats accumulate options and electrical systems that increase maintenance demands and potential downtime if not carefully managed. Transport to Australia, insurance for blue‑water plans and marina berthing costs for a wide beam should be part of ownership budgeting and planning.
Ownership, maintenance and refit
Maintenance on the Lagoon 50 is similar to other production catamarans: gelcoat and composite repairs, routine engine and saildrive servicing (or shaft leg installations where fitted), generator, air conditioning and watermaker servicing, and rig and running‑gear checks. Owners who intend extended cruising should budget for periodic antifouling, standing rigging checks and replacement cycles for high‑load components such as furling drum bearings and winches.
Refit work commonly involves modernising electronics, upgrading sail inventories, fitting lithium‑ion house battery banks, and updating galley and upholstery materials. Because the 50 is built on production moulds, replacement panels and many original equipment parts remain available via Lagoon’s service network and dealer channels, which is a practical advantage for long‑term owners.
What to inspect before buying
- Structural condition of hulls and bridgedeck: look for delamination, core water intrusion around deck fittings, chainplates and keel‑to‑hull joints.
- Rigging and spars: check standing rigging age, swage integrity, rod ends, and mast step area for corrosion or movement signs.
- Engine and transmission hours and service records; check for overheating, corrosion on supports, and shaft/prop condition.
- Electrics and batteries: capacity, inverter/charger history, whether batteries are lead‑acid or lithium and presence of proper battery management systems.
- Sails and furling gear: measure sail condition, UV wear, condition of batten pockets, and smoothness of furler operation.
- Water ingress points: inspect around hatches, windows and deck hardware for staining or soft spots indicating leaks.
- Plumbing and sanitation: verify heads, pumps and holding tank systems, and check for unpleasant odours indicating poor seals or venting.
- Check all factory and owner‑fitted options against known service requirements — e.g. generators, air‑conditioning, watermakers — and ensure spare parts or service agreements are available locally.
Who this boat suits
The Lagoon 50 is aimed at cruising couples or families who prioritise onboard comfort, social living spaces and the ability to cruise long distances with manageable sail handling. It is also a pragmatic choice for owners who plan to combine private use with occasional charter income, thanks to its versatile cabin plans. The boat suits sailors who accept a trade‑off: prioritise liveability and straightforward systems over outright windward performance.
For Australian owners who plan extended coastal exploration, island hopping in Queensland and Western Australia, or circumnavigation with careful planning, the Lagoon 50 provides a roomy and capable platform — provided owners maintain disciplined weather planning, a conservative sail‑handling approach in strong conditions and a clear maintenance programme for the ship’s systems.
Sources consulted: Lagoon (catamarans‑lagoon.com), VPLP / design & technical summaries (manufacturer specifications), YachtWorld / broker technical listings, Simpson Marine / launch reports, De Valk / technical brochure listings.
