The Leopard 58 arrived as Leopard Catamarans’ flagship sailing catamaran: a large, comfortable production cruising platform intended for both commercial charter operators and private owners seeking expansive living spaces and easy deck access. The design is recognisable as a modern Robertson & Caine product derived from Simonis/Voogd lines—broad beam, fine bows and a high bridgedeck to reduce slamming while delivering accommodation normally found on larger yachts.
This guide covers the specifications, explains why particular features matter in everyday use, and flags model‑specific inspection and maintenance items for Australian buyers. Where the 58 was offered in multiple accommodation plans I explain the variants and how they affect tankage, systems access and resale appeal.
Overview and design purpose
The Leopard 58 was conceived as a large production cruising catamaran that could satisfy two complementary markets: fleet charter operations that demand generous guest berths and easy servicing, and private owners wanting a spacious, comfortable blue‑water liveaboard. The emphasis is on interior volume, social spaces and simple systems rather than racing performance. Even so, the hull form and fractional rig were designed to give reasonable passage speeds and manageable sailplans for short‑handed crews.
Key design priorities were: a split‑level saloon and cockpit arrangement for socialising and visibility; multiple cabin arrangements including three‑ and four‑cabin owner/charter layouts; robust construction with emphasis on durability under commercial use; and twin diesel engines and substantial tankage to support extended passages or charter turnover between ports.
Designer, builder and production
The Leopard 58 was developed by Robertson & Caine in partnership with Leopard Catamarans and naval architects Simonis/Voogd. Robertson & Caine (Cape Town, South Africa) have been the production yard for Leopard models for decades; Simonis/Voogd provided the naval architecture typical for Leopard’s sailing range. The model first appeared in the early 2010s and has been built for both private buyers and charter companies (notably The Moorings), which influenced internal layouts and fitout options.
Leopard Catamarans retained global sales and distribution while the boats were built at Robertson & Caine. Over time the 58 was offered in several accommodation formats and equipment packages to suit either private ownership or the commercial charter market.
Construction and hull design
Construction follows Leopard and Robertson & Caine production practice for larger cruising cats: hand‑laid fibreglass hulls and structural deck mouldings with internal reinforcement grid structures bonding bulkheads and beams. The emphasis is on robust, repeatable construction capable of heavy use. The bridgedeck is elevated to reduce slamming and provide forward cabin headroom. The hulls have fine entries to reduce hobby‑horsing and promote a comfortable motion in a seaway for a displacement catamaran of this size.
Keel arrangement is shallow fixed keels integral to each hull rather than deep fin keels, giving a moderate draft that simplifies marina access and anchoring in shallow anchorages—an advantage for many Australian cruising grounds. Steering is by rudder(s) mounted on each hull; steering gear is designed for redundancy and straightforward maintenance. Rigging is a deck‑stepped fractional sloop arrangement sized for a balance between power and manageability; aluminium spars are standard on production boats.
Specifications
Cockpit, deck layout and sail handling
The Leopard 58’s deck plan supports convivial alfresco living and practical sail handling. A large aft cockpit provides dining and lounging space; the saloon is typically split‑level, with seating, galley and chart/navigation console arranged for visibility and social interaction. On many examples the cockpit leads directly to a cockpit table and large transom steps for water access—features valued by charter guests and families alike.
Sail controls are led to the coachroof and cockpit areas in production fitouts so that a short‑handed crew can handle sheets, halyards and reefing lines without long deck runs. The fractional rig and generous slab‑reefing mainsail make reefing straightforward; a furling headsail and optional code‑0 or asymmetric sails are common for off‑wind work. Winch placement, line leads and cleat locations vary by spec but are generally arranged to favour safe movement and easy sheeting from the seated helm position or from the cockpit.
Deck movement is wide and uncluttered with walkways around the coachroof and foredeck access. Handholds and lifelines are standard; stanchions and high bulwarks provide security when moving forward. The bridgedeck clearance aims to limit slamming, although in very short steep seas a catamaran of this size will still transmit motion to the saloon—something to be expected and managed by seamanship and passage planning.
Interior and accommodation
The Leopard 58 is defined by volume. The split‑level saloon raises the main dining and seating area above the aft cockpit, improving visibility and internal flow. Accommodation options were offered to suit charter or private owners: typical private layouts concentrate on a three‑cabin owner setup with a full‑width owner suite in one hull and guest cabins in the other; charter versions use four or five cabins each with en‑suite heads to maximise guest capacity.
Interior joinery in production boats uses laminated veneers and marine plywood core furniture to balance weight with durability—again reflecting the model’s charter pedigree where fittings must withstand heavy use. The galley is usually across the saloon or aft on the main level, sized to feed large groups. Refrigeration, cooking appliances and a watermaker are commonly fitted as factory or dealer options.
Ventilation and natural light are strong points: large forward and coachroof windows plus multiple hatches give generous cross‑flow. Many fitouts include air conditioning and generator options for those planning tropical cruising or long‑term liveaboard comfort, but those systems add weight and service obligations that prospective owners should evaluate against usage and refit budgets.
Sailing and handling
Performance for the Leopard 58 sits in the cruising‑catameran envelope: not a lightweight racer but capable of good passage speeds when trimmed and sailed with the tradeoffs of a comfortable, voluminous platform. The fine bows and relatively low wetted surface for the beam produce efficient upwind tracking for a boat of this displacement. Sail area to displacement ratios reported in spec sheets indicate the 58 will make steady passage speeds in moderate conditions; in stronger winds reefing early and using smaller headsails will keep balance and reduce pitch and acceleration loads on the rig.
Twin engines give excellent manoeuvrability under power, especially for close‑quarters handling in marinas—useful in Australian harbours where tidal streams and confined berths are common. Rudder feel is typical for production cats: light at speed and heavier when slow; expect some helm correction when motoring in crosswinds. Docking aids such as bow thrusters are optional on some examples and can be a worthwhile investment for owner‑skippers reluctant to rely on brief bursts of engine thrust for lateral control.
Australian sailing uses and conditions
In Australia the Leopard 58 is best suited to coastal cruising, liveaboard passages and for owners who plan extended stays in tropical or subtropical waters—Queensland’s Great Barrier Reef islands, the Whitsundays, the Kimberley (where careful passage planning and shallow draft are advantages), and extended east coast cruising. The relatively shallow draught and abundant tankage make the 58 practical for lengthy passages between remote anchorages.
For blue‑water passages the 58’s volume and tankage make it comfortable for long legs; however owners should be realistic about payload. Heavy cruising kit, extra watermakers, multiple gensets and air conditioning increase displacement and change sailing balance and motion—so fitout choices matter for Australian conditions, where trade wind sailing, strong seasonal weather and long distances between marinas are common.
Principal strengths
- Large interior volume and social spaces — split saloon and spacious cockpit favour liveability and entertaining.
- Flexible accommodation options — owner and charter layouts allow buyers to prioritise privacy or guest capacity.
- Robust, production‑grade construction — designed to withstand heavy use typical of charter fleets.
- Substantial tankage and twin engines — suitable for extended cruising without frequent refuelling or fill‑ups.
- Shallow draft — access to many Australian anchorages that deeper monohulls cannot reach.
Limitations and compromises
The Leopard 58 is not a racing machine. Its weight, volume and charter‑style fitout compromise acceleration and light‑air performance compared with lighter, performance‑oriented cats. The boat’s systems can be complex: large capacity tanks, gensets, desalination units and air conditioning are conveniences that demand maintenance and increase long‑term ownership cost. Owners should also be aware that commoditised production joinery and systems, while durable, will show wear with heavy use and often require upgrades for private owners seeking higher‑end finishes.
Because many Leopard 58s were built to charter specifications, interior wear, non‑standard wiring, additional safety items and high‑hour engines are possible on the second‑hand market; these are factors that can affect price and refit needs for Australian buyers.
Ownership, maintenance and refit
Routine maintenance for a Leopard 58 follows both normal cruising‑cat practice and the increased needs of a large, well‑equipped vessel. Regular engine and gearbox servicing, sail and rig inspection, hull antifouling, and air conditioning/desalination maintenance dominate running costs. Where air conditioning and generators are fitted, owners should budget for periodic compressor and alternator servicing and fuel system checks—especially important after prolonged periods in tropical saltwater environments common around northern Australia.
Refit considerations are often driven by layout and choice: private owners upgrading from a charter spec will commonly replace soft furnishings, refresh joinery, rewire electronics to owner preference, and replace commercial galley appliances with domestic units better suited to private usage. Careful assessment of structural components—chainplates, bulkhead bonds, rudder bearings and engine beds—should be part of any larger refit, particularly on older 58s with heavy commercial use histories.
What to inspect before buying
- Engine hours, service history and survey for twin diesels—verify oil analysis, heat exchanger condition and gearbox records.
- Hull/deck laminate and core condition—look for delamination, soft spots or repairs around chainplates, keels and high‑load areas.
- Rig and standing rigging condition—age of mast, rod/wire standing rigging, halyard and furler condition, and tensioning records.
- Electrics and electronics—ensure batteries, chargers, inverters and navigation electronics are correctly specified and serviceable; look for non‑factory modifications typical of charter conversions.
- Plumbing and tankage—watermaker service records, bilge pump operation, freshwater tanks for contamination and structural supports for large tanks.
- Heads and waste systems—macerators, holding tanks and deck fittings for correct operation and leaks.
- Rudder and steering gear—check bearings, emergency tiller provisions and any signs of corrosion or abrasion.
- Accommodation wear—charter‑spec boats often require reupholstery, replacement of mattresses, and attention to joinery wear.
Who this boat suits
The Leopard 58 suits owners prioritising space, social living and the ability to carry guests in comfort. It is a natural choice for couples who cruise with family and friends, owner‑operators who want to run a small charter business, or liveaboard sailors desiring a large, sea‑worthy platform with the range to undertake long coastal legs in Australia.
It is less well suited to buyers seeking a lightweight, high‑performance passage maker, or owners who want the lowest possible running costs and simplest systems. Prospective Australian owners should weigh how much time they will spend at anchor versus passage making, and whether they are prepared for the higher maintenance demands of complex systems (air conditioning, watermakers, gensets) often found on boats of this size.
Sources consulted: leopardcatamarans.com; boat‑specs.com; multihulls‑world.com; leopardcatamaransbrokerage.com; keelindex.com
