The RS500 occupies a clear niche between high‑powered youth skiffs and more forgiving double‑handers used for training and club racing. Its comparatively compact hull and efficient sail plan give it lively planing performance while the two rig sizes and conservative deck layout make the boat manageable to sail and rig for crews with a wide range of combined weights.
This guide examines the RS500’s design intent, hull and rig features, how the boat sails and what it means to own one in Australia. It focuses on verified model-specific detail: hull dimensions, foil arrangement, sail options, cockpit ergonomics and typical uses, and it lists the model’s principal strengths and the compromises owners need to accept.
Overview and design purpose
The RS500 was conceived as a high‑performance two‑person dinghy that remains controllable and competitive across a broad crew‑weight window. Designer Phil Morrison created a hull and rig combination intended to plane readily yet not demand extreme crew size or brute strength to manage the controls. To achieve that aim the class deliberately offers two sail choices — the smaller Dacron 'S' rig and the larger Mylar 'XL' rig — allowing youth teams and lighter crews to race the same boat as heavier adult teams with more power.
As a one‑design class the RS500 targets club and international racing while also being usable for fast day sailing. The layout is deliberately uncluttered: all essential control routes keep the cockpit clear for crew movement and for efficient trapeze crewing. The design places emphasis on good recovery after capsize and straightforward launching and retrieval, making the RS500 a pragmatic choice for clubs and travelling campaigns as well as serious racers.
Designer, builder and production
The RS500 was designed by Phil Morrison and is produced by RS Sailing, a UK‑based smallboat manufacturer. The RS brand has positioned the RS500 as an international class with an active racing circuit and World Championship events, and the boat benefits from RS Sailing’s global dealer and support network.
Production has been continuous since the model’s introduction. The RS500 has World Sailing (formerly ISAF) recognised class status and an organised international class association that maintains the class rules, organises events and clarifies permitted equipment and measurement tolerances.
Construction and hull design
The RS500 is a GRP/composite moulded monohull. The hull form is beamy for length and features relatively flat aft sections to encourage early planing. Construction emphasises a stiff, lightweight hull with sufficient longitudinal rocker control and hull volume aft to provide dynamic control when surfing or planing.
Foils are a pivoting GRP or sandwich centreboard and a pivoting rudder blade. The pivoting arrangement aids launching, recovery and shallow‑water handling; both foils are shaped to provide a predictable balance between pointing ability and manoeuvrability. The transom is low for easy re‑boarding after an inversion, and the cockpit is shallow and self‑draining to reduce water retention and speed recovery.
Specifications
Cockpit, deck layout and sail handling
The RS500 cockpit is intentionally uncluttered and shallow to facilitate rapid movement for the trapeze crew and to make capsize recovery straightforward. A forward mast well positions the mast to free up usable cockpit floor and thwart space; the cockpit drains efficiently to reduce water retention during and after capsizes.
Sail controls are routed for racing: mainsheet blocks and traveller positions allow for adjustable mainsheet geometry, while a compression‑strut style vang clears the cockpit and gives strong leech control without obstructing crew. The jib is available with a furling option on some setups and control lines are led aft to be accessible to the helm for trimming. The asymmetric spinnaker uses an extendable tack/chute system to speed hoists and drops; sheets and halyards are arranged for swift crew choreography while trapeze wires are standard D12 rope configuration with safety considerations for class racing.
The tiller and extension setup gives the helm precise feel and the pivoting rudder makes launching and recovery simple. Deck hardware is race‑orientated but robust enough for frequent club use, and an optional race rope pack and other accessory items are commonly fitted to set up the boat for competitive regattas.
Interior and accommodation
The RS500 is a performance dinghy and has no accommodation. The interior (cockpit) layout concentrates on crew ergonomics: wide side decks and a reasonably flat cockpit floor make it possible to hike, move on and off the gunwale and operate the trapeze with minimal obstruction. Storage is minimal by design — owners typically use sealed bags and tether points for essential items during day sailing or regattas.
Sailing and handling
On the water the RS500 behaves like a typical light skiff: it accelerates onto the plane readily in moderate wind and rewards crews with lively downwind surfing and fast reaching angles. The flat aft sections and moderate beam help the boat achieve and maintain planing speed. Upwind the boat points well for a skiff of its size when properly trimmed; foil shapes and centreboard area favour a compromise between pointing and forgiving helm balance.
Balance and helm feel are influenced by rig choice: the S rig produces a softer, more forgiving handling character suitable for lighter crews and training, while the XL rig increases power and requires more active weight placement and vang/leech management. The single trapeze makes the RS500 physically demanding compared with non‑trapeze double‑handers, but much less extreme than two‑trapeze skiffs.
Manoeuvres such as tacks and gybes are swift when crew choreography is practiced; the low transom aids re‑boarding after capsizes and the self‑draining cockpit reduces time lost after a dunking. The boat’s simplicity of control routing aids short‑handed sailing — a competent helm and crew can race it effectively without a large spares inventory.
Australian sailing uses and conditions
In Australia the RS500 is best used for club racing, regional regattas and as a high‑performance trainer for sailors stepping up from single‑handers or junior double‑handers. Its forgiving construction and the S‑rig option make it suitable for youth crews moving into trapeze work, while the XL rig keeps the class relevant for adults wanting a lively double‑hander without the physical extremes of foiling skiffs.
Sheltered bays, harbour courses and coastal race areas suit the RS500 well; like all light skiffs it is more demanding in big open‑ocean conditions where steep waves and strong gusts require careful weight management and seamanship. Clubs running mixed‑fleet regattas often allocate the RS500 to the open dinghy handicap fleets, and the model’s international class structure supports inter‑state and international campaigns for competitive crews.
Principal strengths
- Two‑rig system (S and XL) broadens crew weight range and improves accessibility for youth and light crews.
- Light, stiff hull and flat aft sections promote early planing and rewarding downwind performance.
- Uncluttered cockpit and pivoting foils simplify launching, recovery and capsize righting.
- International one‑design class and active racing calendar support regatta sailing and second‑hand liquidity.
- Robust race‑orientated hardware from RS Sailing and good dealer support worldwide.
Limitations and compromises
The RS500 is a performance dinghy and brings the usual compromises. It has limited load‑carrying or cruising capability — no accommodation and almost no storage — so it is strictly a day‑use racing or training platform. The single trapeze and lively sail plan mean that crews must be physically active; beginners will need coaching to master crewing and spinnaker work safely.
As with other light performance boats, heavy chop, strong offshore gust patterns and large swell increase the physical and seamanship demands on the crew. The class tolerates a range of hull weights in practice, so prospective buyers should verify individual hull condition and measurements where strict one‑design compliance matters to them.
Ownership, maintenance and refit
Routine ownership of an RS500 is straightforward: GRP hulls require the usual checks for osmosis, gelcoat condition and localised damage, while foils and rudder pintles should be inspected for wear and correct pivoting function. The aluminium mast and boom need annual inspection for compression damage and corrosion, and standing and running rigging should be checked for chafe and correct swage/crimp condition prior to every season.
Typical refit items for older boats include replacement foils or foil re‑fairing, mast refurbishments or replacement if extrusions are damaged, and replacement of control lines and block bearings. Given the class’ one‑design nature, replacement spars, sails and fittings are readily available through RS Sailing dealers and class‑approved suppliers, which reduces the complexity of upgrades or repairs.
What to inspect before buying
- Hull weight and general hull condition: check for repairs, soft areas, osmosis blistering and consistent mould lines if you intend to race under strict measurement rules.
- Centreboard and rudder pivots: ensure the foils pivot freely, are not delaminated and that stock and pintles show no severe wear.
- Mast and spars: inspect for dents, kinks, corrosion at fittings and condition of the mast step and partners.
- Sails and battens: verify which rig (S or XL) is fitted, inspect sail cloth for UV degradation, tape and stitching, and check battens for straightness and secure pocketing.
- Running rigging and blocks: check for UV sun‑damage, embedded grit in sheets, worn halyards and block bearing condition.
- Trapeze and safety gear: inspect wire and D12 lines for stretch and chafe, and verify the presence and condition of righting lines and any masthead flotation.
- Class compliance paperwork: if buying to race, confirm that the boat measures within class rules and ask for any historic measurement certificates.
Who this boat suits
The RS500 suits experienced club racers and committed youth crews who want to progress into trapeze sailing without stepping immediately into two‑trapeze or foiling skiffs. It is also attractive to adult couples or mixed crews who want a lively, manageable double‑hander that can be campaigned at national and international regattas. Sailing schools might use the S‑rigged boats for advanced trapeze training, but the RS500 is primarily a racing platform rather than an introductory learn‑to‑sail hull.
Prospective owners should weigh the boat’s race‑orientated demands against their intended use. Crews wanting weekend family daysail comfort and storage would be better served by larger training or cruising dinghies; those seeking excitement, speed and close‑fleet racing will find the RS500 rewarding when crew skills and fitness match the boat’s performance capability.
Sources consulted: rssailing.com, rs500.org, sailingworld.com, sailing.org.au, wikipedia.org
