The Valiant 47 is a purposeful bluewater cruising yacht that sits in the lineage of Valiant mid‑size cruisers. Launched in the early 1980s, the model adopts the same double‑ended canoe stern profile and heavy build that established Valiant’s reputation for safe, long‑range voyaging. The hull and systems emphasise reliability, seakeeping and the ability to carry stores and equipment for extended offshore work rather than lightweight performance.
As a platform the Valiant 47 appeals to sailors who prioritise comfort underway, predictable handling in big seas and the structural margin to accept heavy loads and refit upgrades. It is not a modern performance cruiser, but for those planning coastal and offshore passages in Australian waters — from Bass Strait crossings to long trips up and down the east coast and offshore passages to islands — it offers a proven, conservative compromise between capability and manageability.
Overview and design purpose
The Valiant 47 was conceived as a long‑range cruising yacht: a roomy, well‑built hull that could be handled by a couple yet tolerate significant stores, fuel and cruising equipment for extended passages. The design continues the Valiant family approach of seaworthiness and comfortable motion: relatively wide sections for internal volume, a pronounced forefoot and a canoe stern that reduces hobby‑horsing and stern slamming in following seas.
Design priorities were safety at sea, load‑carrying and straightforward sail control. That means the boat carries a cutter or cutter‑style double headsail arrangement with a substantial mainsail — a powerful but versatile sailplan that gives options for reefing and headsail combinations in heavy weather. The underbody and structure favour stiffness and a steady ride over light‑air acceleration.
Designer, builder and production
The Valiant 47 was produced by Valiant Yachts (USA) during the 1980s and into the early 1990s. The hull design carries the stamp of the same design philosophy that guided earlier Valiant models; many contemporary references attribute the hull form to Robert Perry’s design office, which contributed to the Valiant series’ successful reputation for bluewater capability. Production numbers for the 47 were limited compared with smaller Valiant models — the boat was a relatively low‑volume, specialist offering intended for serious cruising owners rather than mass market sales.
Build batches were hand‑laid fibreglass with a focus on structural longevity rather than weight savings. Valiant’s construction and finish standards were positioned toward the higher end of production cruisers of the period; this is reflected in layout choices and systems provision typical of yachts intended for extended voyaging.
Construction and hull design
The Valiant 47 is a fibre‑glass (glassfibre) monohull with a full, moderate displacement and a fin keel coupled with a skeg‑hung rudder arrangement. The hull form features a relatively full midsection tapering to a pronounced canoe or double‑ended stern. That stern shape improves behaviour in large following seas and smooths the motion through waves — a desirable trait for offshore voyaging where reducing abrupt pitching and stern impacts enhances safety and crew comfort.
Construction is traditionally hand‑laid or chopped strand mat with woven rovings in high‑load areas, and a substantial internal grid or structural stringer system. Ballast is lead and located in a deep fin keel; the combination of ballast and hull form produces a stiff righting moment and high load‑carrying capacity. The rudder is mounted on a partial skeg, which offers a compromise between protection and directional control compared with a spade rudder.
Specifications
Note: The figures above reflect standard, reported equipment and hull measurements for the Valiant 47 as built in the 1980s. Owners commonly modify fuel/water tankage, engine packages and accommodation during refits; confirm individual boat records when assessing a specific hull.
Cockpit, deck layout and sail handling
The deck plan and cockpit of the Valiant 47 were arranged with offshore‑centric ergonomics: a protected cockpit large enough for crew comfort and for handling sail changes, with primary winches and halyard leads positioned to allow many controls to be worked from the cockpit. All control lines can be led aft — a deliberate choice that supports short‑handing and heavy weather management, allowing reefing and headsail changes without requiring crew to spend prolonged time forward.
The cutter rig gives flexibility: a large foresail for light to moderate conditions, and an inner staysail for heavy weather or balance. Reefing arrangements on the mainsail were traditionally slab reefs, and many owners later retrofitted roller reefing or slab reefing enhancements. Winch capacity, padeye placement and jackline attachment points are generally robust, reflecting the boat’s offshore intent.
Deck hardware on original builds was conservative and heavy‑duty rather than minimalistic; there is typically good foredeck backing for anchors and ground tackle, and a long bowsprit was sometimes fitted to increase anchor gear separation or fly offwind sails. Handrails, toerails and cockpit coamings are sized for secure movement in a seaway.
Interior and accommodation
Interior layouts vary between examples, but the Valiant 47’s generous beam and long LWL create a commodious internal volume for a yacht of its era. Typical layouts provide a forward cabin (often V‑berth), a large saloon with settees that can serve as sea berths, and an aft cabin — frequently a private double — which is an advantage for long‑term liveaboard comfort.
Galley arrangements were usually practical and sea‑worthy, with gimballed cookers, deep sinks and stowage for long‑range provisioning. Heads (toilets) and shower areas were sized for liveability, and tankage for water and fuel was generous compared with lighter coastal cruisers. Ventilation relies on a combination of hatches and opening ports typical of the period; many owners improve airflow with additional dorade vents, fans or upgraded hatch seals during refits.
Storage is a strong point: the boat’s displacement and structure allow plenty of stowage under berths, inside cabinetry and in dedicated lockers. Builders typically left space for heavy‑duty systems such as additional batteries, watermakers and large galley refrigeration — equipment packages that long‑distance cruisers commonly adopt.
Sailing and handling
On passage the Valiant 47 behaves as a traditional heavy‑displacement cruiser: it tracks steadily, carries momentum through waves and offers a comfortable motion that reduces crew fatigue on long legs. The hull’s buoyancy distribution and canoe stern help the boat maintain directional stability in following seas and reduce violent yaw or hobby‑horsing when compared with more modern, flat‑stern designs.
Performance in light airs is not the model’s strength; the boat climbs onto its hull‑speed but lacks the acceleration of lighter, modern cruisers. In moderate to strong winds the 47 is confident and powerful. The cutter rig and relatively generous sail area allow effective sail combinations for balance and drive — a staysail with a reefed main is a common heavy‑weather setup that maintains steerage while lowering loads on the rig.
Maneuvering in tight marinas with the original Westerbeke‑class engine requires planning: although the factory engine is adequate for harbour work, many owners upgrade to higher horsepower units or install bow thrusters for close‑quarters handling. The skeg‑supported rudder is robust and gives predictable helm feedback but is not as quick‑responding as modern spade rudders; wheel steering typically requires modest helm correction rather than aggressive inputs.
Australian sailing uses and conditions
In Australia the Valiant 47 is best employed as a serious coastal and offshore cruiser: comfortable for long family passages along the east coast, capable in Bass Strait crossings and competent for offshore island work such as passages to Lord Howe Island, Norfolk Island or across to New Zealand when prepared and crewed appropriately. The boat’s motion comfort, tankage capacity and heavy build make it well suited to the variable conditions found in the region’s temperate to sub‑tropical waters.
For club racing the 47 is not typically competitive against modern cruiser‑racers; however, in handicap events and classic divisions it can be sailed successfully by experienced crews. Its strengths are safety and load‑carrying rather than sprint performance, so owners who value passage capability and liveability will find it a strong match for Australian bluewater cruising programs.
Principal strengths
- Seaworthy hull form and canoe stern that improve following‑sea behaviour and motion comfort at sea.
- Robust build and internal structure that accept heavy gear, tankage and refit modifications.
- Cutter rig with control lines led aft for short‑handed handling and flexible sail combinations in heavy weather.
- Generous tankage and storage capacity suited to long passages and self‑sufficiency.
- Skeg‑protected rudder and conservative underbody that offer damage resilience and directional stability.
Limitations and compromises
- Heavy displacement and conservative hull shape mean poorer light‑air performance and slower acceleration than modern designs.
- Older build systems and vintage systems wiring may require thorough mechanical and electrical refits on older boats.
- Original engine power and single‑engine manoeuvrability can be marginal in strong tidal or wind conditions; some owners replace or uprate propulsive systems.
- Ventilation and interior ergonomics reflect 1980s practice; owners commonly upgrade hatches, vents and insulation for modern comfort standards.
- Limited new‑boat support due to low production numbers; spares and model‑specific parts may need sourcing or custom fabrication.
Ownership, maintenance and refit
Owning a Valiant 47 is a long‑term, system‑centric commitment rather than a minimal‑maintenance pastime. Typical recurring maintenance items include standing and running rigging replacement cycles (especially where rods or tapered rigs have been fitted), inspection and possible rebedding of deck gear, routine keel/hull interface and keel bolt checks, and attention to through‑hull fittings and seacocks.
Ageing systems commonly requiring attention are engine replacement or overhaul (many original engines are four decades old), fuel system polishing, electrical system rewiring or modernisation (additional battery banks, charger/inverter upgrades) and plumbing renewals. Many owners invest in modern navigation, AIS, autopilot and communications packages to bring the yacht up to contemporary cruising safety standards.
Structural refits sometimes include topside repaint, deck core checks and possible replacement of soft core in high‑load areas. Given the model’s offshore intent, buyers should expect to allocate budget for preventive refit work rather than assuming a turnkey condition.
What to inspect before buying
- Hull and deck laminate condition: look for soft spots, blistering, signs of past repairs and evidence of deck‑core delamination around fittings and winches.
- Keel attachment and keel bolts: inspect for corrosion, movement, evidence of past grounding repairs and quality of keel‑to‑hull bonding.
- Rudder and skeg: check bearings, shaft condition and any play; skeg and rudder repairs are costly and crucial for offshore safety.
- Standing rigging: confirm age and replacement history; terminals and swage fittings should be inspected for fatigue or corrosion.
- Engine and propulsion: service history, heat exchanger condition, gearbox condition and propeller shaft alignment; verify fuel tank condition and look for water ingress or contamination.
- Plumbing and seacocks: operate all seacocks, inspect hoses and clamps, and confirm the integrity of through‑hull fittings.
- Electrical systems: age of wiring, battery bank condition, presence of appropriate circuit protection and evidence of professional upgrades.
- Interior and joinery: water damage indicators such as discolouration, soft veneer, odour of dampness and carpet/panel deterioration.
- Owner history and refit receipts: seek written records for major structural work, rigging replacement and systems upgrades.
Who this boat suits
The Valiant 47 suits experienced cruising couples and small crews who plan extended passages and value structural margin, storage and seakeeping over outright pace. It is a strong candidate for sailors planning long coastal voyages in Australian waters, ocean passages where a comfortable motion and heavy weather resilience are priorities, or owners who wish to build a serious live‑aboard or expedition platform.
It is less suited to sailors seeking a lively club racer or a short‑range weekend boat that prioritises low maintenance and instant responsiveness. Prospective owners should be comfortable budgeting for system modernisation and be ready to approach purchase with an honest inspection list and contingency funds for refit work.
Sources consulted: sailboatdata.com; valiantsailboats.com; sailboat‑cruising.com; sailboatlab.com; boatsonline.com.au
