The Vancouver 36 by Robert B. Harris is a purpose‑built ocean cruiser from the late 1970s that follows a conservative design philosophy: strong hull form, generous ballast for stiffness, a cutter rig for sail plan versatility and a modified long keel for directional stability and protection of the rudder. It is not a performance cruiser in the modern sense but a seagoing platform intended for long passages, live‑aboard endurance and straightforward, low‑maintenance systems.
Only a small number of these boats were completed by a couple of small US builders in the late 1970s and early 1980s. That limited production, combined with their rugged layout, means available boats on the resale market are often older, with a wide range of owner modifications. The following guide describes the confirmed Harris Vancouver 36 variant, its construction, practical characteristics and what prospective Australian owners should inspect and expect.
Overview and design purpose
The Vancouver 36 (Harris) was conceived explicitly as a bluewater cruiser. The brief favoured seaworthiness, load‑carrying and simple systems rather than racing speed or coastal day‑sail convenience. Key design choices reflect that mission:
- moderate to heavy displacement to carry stores, fuel and water for extended passages, and to provide a more comfortable motion in a seaway;
- a modified long keel and keel‑mounted rudder to protect underwater appendages and provide strong directional stability on ocean legs;
- a cutter rig to allow flexible sail combinations for varying conditions, aiding short‑handed offshore handling and storm management;
- robust fuel and freshwater tankage to support longer legs between resupply points.
These characteristics make the Harris Vancouver 36 best viewed as an offshore tool for experienced sailors who value ruggedness and predictability over interior volume or light‑air performance.
Designer, builder and production
Designer: Robert B. Harris, a naval architect known for his work on bluewater and multihull designs. Harris’ approach emphasises seakindly hull forms and conservative engineering suitable for offshore work.
Builder and production: The Vancouver 36 was first built by Durbeck’s Inc in Sarasota, Florida, beginning in 1977. When Durbeck’s ceased operations in the early 1980s, Hidden Harbor Boat Works constructed some additional hulls. Production numbers were small and intermittent; surviving records indicate only a few dozen at most were completed and several more were finished by small yards or offered in various states of completion. A pilot‑house variant and later unrelated boats carrying the 'Vancouver 36' name exist from different designers and builders; this guide covers only the Robert B. Harris design produced in the United States in the late 1970s and early 1980s.
Construction and hull design
The Harris Vancouver 36 uses conventional hand‑laid fibreglass hull construction consistent with production techniques of its era. The hull form is moderate‑to‑full with a pronounced entry and relatively full aft sections compared with contemporary performance cruisers, giving inherent directional stability and reserve buoyancy in heavy seas.
Keel and rudder: the design is described as having a modified long keel with substantial ballast bolted or encapsulated, and a keel‑mounted rudder. The long‑keel character provides good tracking on ocean legs and reduces vulnerability to grounding or fouling. It also lengthens turning radii and reduces manoeuvrability in tight marinas compared with fin‑keel boats with spade rudders.
Construction notes to expect on an individual boat: solid fibreglass hull below the waterline with a fibreglass deck; older examples may have deck core materials or joinery typical of the period and will often show owner modifications to chainplates, deck hardware and rigging. Structural stringers and bulkheads are present to distribute loads, but condition is model‑specific and must be inspected carefully on second‑hand examples.
Specifications
Note: these figures apply to the Robert B. Harris Vancouver 36 production of the late 1970s and early 1980s. A later, unrelated UK design carries the same name; do not conflate the two when assessing a specific hull.
Cockpit, deck layout and sail handling
Deck layout and cockpit follow classic bluewater priorities: safe movement, good handholds and a functional working cockpit rather than an entertainment space. Cockpit benches are typically deep and protected by substantial coamings; the transom and deckhouse geometry on standard examples keep spray and green water away from crew on most points of sail.
Sail controls reflect the cutter rig philosophy. Expect:
- a furling or hanked inner jib/ staysail plus a larger outer headsail for reaching and upwind work; this allows reefing to reduce sail area progressively while keeping balance;
- sheet and halyard led back to the cockpit in many owner‑modified boats, but original fitouts may have some controls on the mast or coachroof requiring deck work for major sail changes;
- robust, relatively simple hardware rather than lightweight racing fittings—winches, cleats and blocks sized for heavy loading rather than fast handling;
- reefing usually via slab reefs on the mainsail (classic single or two reef points) or, in some refits, roller reefing mains adapted by owners.
Because of the keel form and displacement, tacking and manoeuvring are deliberate rather than nimble; close‑quarters boat handling benefits from a conservative helm and deliberate sail trim. Short‑handed sailing is practical where sail controls have been led aft; however, reefing and sail changes still require planning because of sail size and momentum in heavier conditions.
Interior and accommodation
Interior layouts vary because several boats were completed in differing states. The general arrangement is traditional and robust rather than focused on maximising light or headroom. Expect a modest saloon with settees that convert to berths, a forward V‑berth, and either an aft quarter berth or small aft cabin depending on the builder finish.
Headroom is moderate for a 36‑footer of the era—sufficient for average height adults but not generous. The galley is functional and arranged for seagoing use: secure stowage, gimballed or braced cooking appliances (where fitted) and work surfaces oriented to allow food preparation while heeled. Storage is provided in lockers and beneath berths but will be less abundant than modern wide‑beam cruisers; owners buying one for extended cruising should budget for careful packing and potential additional cabinetry where space permits.
Ventilation on original boats is by opening hatches and dorade vents; later owner upgrades often include additional ports, fans or solar‑powered ventilators. Joinery is typically timber and robust—many refits address cosmetic wear rather than structural joinery faults.
Sailing and handling
On passage the Vancouver 36 feels like a traditional heavy cruiser: comfortable in a seaway, capable of maintaining a steady passage speed, and forgiving in heavy weather. The hull shape and ballast provide a measured motion with good directional steadiness—qualities sailors appreciate on long legs. Hull speed, calculated from the waterline length, is modest and the boat is not designed for planing or surfing in light winds.
Close‑hauled performance is adequate for a heavy cruiser; the cutter rig allows a balanced sail combination for sailing to windward with a staysail plus a reduced headsail. The boat will track well off the wind and is likely to excel in downwind or reaching conditions with the correct sail inventory. Momentum and displacement mean that steering corrections are gentle but persistent—helm feel is generally predictable.
Manoeuvring under power requires anticipation because of the long keel and keel‑mounted rudder. Docking and tight tacks demand slower speeds and sometimes the use of spring lines or a bow thruster where owners have retrofitted one. Under power the original Volvo 35 hp engine is conservative for the displacement and is mainly sized for reliable, economical passage‑making rather than sprinting in adverse conditions.
Australian sailing uses and conditions
For Australian waters, the Harris Vancouver 36 suits long coastal legs and offshore passages where seakeeping and tankage matter. It is a solid choice for:
- short to medium offshore passages along the east and west coasts where reliable behaviour in mixed sea states is valued;
- live‑aboard cruisers who plan extended times between harbours and value storage, water and fuel capacity;
- owners who cruise in areas where grounding risk exists and the protected keel and rudder offer peace of mind.
Limitations in a modern Australian context include less interior volume and headroom compared with contemporary production cruisers of similar length, and less nimble handling in crowded marinas. The boat’s seaworthiness and tankage make it well suited to Tasman crossings or long‑haul coastal cruising, provided boat systems and safety equipment are upgraded to contemporary standards.
Principal strengths
- Seakindly hull and strong directional stability that reduce crew fatigue on long passages;
- Robust, simple systems that are easier to maintain and repair offshore compared with complex modern gear;
- Generous water and fuel capacity for extended cruising legs without frequent resupply;
- Cutter rig flexibility for heavy‑weather sail plans and balanced handling under sail; and
- Protected keel/rudder arrangement that offers durability and lower risk when grounding or encountering debris.
Limitations and compromises
The Vancouver 36’s trade‑offs derive directly from its bluewater brief. Owners accept reduced interior volume and lower light‑air performance in exchange for seaworthiness. Specific compromises include:
- heavier displacement and longer keel reduce manoeuvrability in marinas and increase dependence on careful docking technique;
- ageing systems on existing examples—electrics, rigging, tanks and plumbing—often need replacement or upgrading to meet contemporary safety and comfort expectations;
- limited production numbers mean spare parts peculiar to specific builders or fittings may be harder to source locally in Australia, requiring imports or custom work;
- the classic interior and joinery are often less airy or open than modern designs, which some owners find constraining for live‑aboard comfort.
Ownership, maintenance and refit
Given the limited production run and age of surviving Vancouver 36s, ownership commonly involves a period of refit or system update. Typical maintenance and refit topics include:
- rigging replacement: standing rigging older than 15–20 years should be assumed at end‑of‑life unless proven otherwise;
- engine servicing or repower: while the original Volvo MD 17C is regarded as reliable, availability of parts and service, and mounting condition, should be assessed. Many owners upgrade cooling systems, exhausts or even repower to more modern marine diesels with better fuel economy and parts support;
- deck and chainplate inspection: original hardware and deck cores need careful examination for moisture intrusion, especially where chainplates penetrate the deck;
- tank surveys and plumbing: steel tanks (if fitted) corrode, and older plastic or aluminium tanks may require replacement; plumbing and seacocks should be renewed for offshore safety;
- electrical upgrades: modern charging, inverter and LED lighting retrofits improve living comfort and reduce battery strain on long cruises.
Because many boats were finished by small yards or owners, systems and workmanship vary—the condition of mechanical installations, wiring and joinery is hull‑specific.
What to inspect before buying
A second‑hand Vancouver 36 requires a thorough survey tailored to the type’s strengths and vulnerabilities. Key inspection items:
- Hull integrity: surveyor assessment for blistering, core issues if decks have cores, structural softness around keel bolts and potential repairs from groundings;
- Keel and rudder: check keel attachment, keel bolts and keel‑mounted rudder condition; signs of movement, corrosion or repairs require careful evaluation;
- Rig and spars: standing and running rigging age and condition, mast step and partners, spreader terminations and any evidence of past spar damage or repair;
- Deck fittings and chainplates: leak history, deck patching, visible corrosion and whether chainplates are backed up internally;
- Engine and drivetrain: compression test, evidence of overheating, shaft alignment, packing gland wear and condition of engine mounts and propeller;
- Tanks and plumbing: inspect for leaks, corrosion, vents and freshwater system hygiene;
- Safety equipment: liferaft age and stowage, EPIRB registration and battery condition, firefighting appliances, and state of bilge pumps and high‑level alarms;
- Documentation: builder and refit records, previous survey reports and any evidence of major insurance‑rated incidents.
A pre‑purchase survey by a marine surveyor experienced with older bluewater cruisers is essential. Given the variability of finishes, budgeting for system replacement and interior refurbishment is prudent.
Who this boat suits
The Harris Vancouver 36 suits sailors who prioritise offshore capability and straightforward, repairable systems over modern comforts and light‑air performance. It fits owners who:
- plan extended coastal or offshore passages and need generous tankage and seakeeping;
- are experienced or willing to learn traditional heavy‑boat seamanship, including careful sail selection and patience with slower manoeuvres in tight spaces;
- prefer a robust, lower‑technology platform that can be maintained with basic workshop skills while underway; and
- value the character and simplicity of an older bluewater design and accept time and money spent on sympathetic refits.
Prospective buyers seeking weekend coastal performance, maximum interior volume for family live‑aboard or minimal refit work to a like‑new standard should consider more modern alternatives. For serious small‑boat offshore work, however, the Vancouver 36 remains a credible, conservative choice when found in sound condition.
Sources consulted: sailboatdata.com; wikipedia.org; boats.com; goodoldboat.com; boatsonline.com.au
