The Centurion 40S was developed as part of Wauquiez’s Centurion range: yachts intended to combine offshore capability with refined deck saloon lines and good sailing performance. The 40S is a 12.35m (approx. 40ft) monohull that sits on the smaller end of Wauquiez’s Centurion family, intended for couples or small crews wanting a capable cruiser that will also respond when sailed spiritedly. Practicality and seakindliness are emphasised alongside an interior that leans toward comfort rather than minimalist racing interiors.
This guide describes the Centurion 40S as a discrete model. The information below draws on builder specifications, brokerage listings and preserved manufacturer material to present verified dimensions, construction features, layout options and the practical strengths and compromises an Australian buyer or skipper should expect.
Readers should note that Wauquiez offered some fitted options and keel variants during production; where dimensions or capacities differ by variant these are clearly identified. The figures in the specification table are taken from available manufacturer and brokerage material and are presented with their supporting source URLs.
Overview and design purpose
The Centurion 40S was conceived as a performance‑oriented cruiser: a compact blue‑water yacht with the sea‑kindly manners, build quality and finish associated with Wauquiez. Designer Berret/Racoupeau gave the hull a moderate beam with a relatively long waterline for the length, a fin keel with a bulb and a spade rudder to deliver a compromise between upwind pointing ability, stability and manageable handling.
The “S” suffix denotes the sporty, slightly performance‑tilted version of the Centurion 40 hull: owners and brokers describe it as suitable for coastal cruising, offshore passagemaking and club racing. The layout and systems reflect this: a comfortable below‑decks environment with practical sail controls led back to the cockpit, plus tankage and systems that support extended cruising without the complexity or expense of larger long‑range yachts.
Designer, builder and production
Designer: Berret/Racoupeau — a well‑known French naval architecture studio noted for combining seaworthy hulls with amenable interiors. Builder: Wauquiez, a French yard recognised for semi‑custom, well finished cruising yachts. The Centurion 40S was first listed in the early 2000s with production around 2003–2007; available records suggest a modest production run rather than mass manufacture.
Wauquiez positioned the Centurion models between smaller cruising yachts and its larger Pilote and Centurion 57 models: a step‑up boat for owners wanting genuine offshore capability without a larger displacement vessel. During and after production the model circulated on the brokerage market; many used examples are sold through European and international brokers, and several have been yacht‑handled for blue‑water sailing.
Construction and hull design
The Centurion 40S hull is predominantly glass‑fibre reinforced plastic (GRP, fibreglass) with areas of sandwich construction where weight, stiffness and thermal insulation benefit from a cored laminate. The hull form is a modern moderate‑to‑high length‑to‑beam ratio for the era, with a pronounced waterline length for better hull speed and a flared topside for interior volume and reserve buoyancy.
The appendage arrangement is a deep fin keel with a lead bulb (often described as a fin with bulb) and a balanced spade rudder. This keel/rudder pairing gives relatively quick helm response and good directional control, important for both offshore tracking and manoeuvring under sail. The underwater geometry aims to trade off ultimate racing efficiency for a stable, forgiving motion and predictable behaviour in seas.
Deck structures and the coachroof are built in GRP, with deck reinforcements around primary load points — mast step, chainplates and winch foundations — to ensure structural load distribution for long‑term offshore use. Some examples fitted higher‑grade finishes below decks, consistent with Wauquiez’s reputation for quality joinery.
Specifications
Cockpit, deck layout and sail handling
The Centurion 40S sports a cockpit sized to balance comfort and control. Wheel steering leads to a straightforward helming position with good visibility to the headsail and coachroof. The cockpit layout favours short‑handed sailing: primary sheets can be led aft to cockpit winches and decisions about sail trim and reefing are reasonably centralised.
Hatches and companionway design aim to keep wet weather out while allowing ventilation. Deck hardware is mounted on a practical, uncluttered coachroof with accessible genoa tracks and adjustable fairleads. Chainplates and structural anchors for the mast are reinforced, reflecting the design emphasis on offshore robustness.
Sail controls typically include a fractional headsail and overlapping genoa plus a slab reefing mainsail; many examples are also fitted with a bowsprit or sprit fittings for an asymmetric spinnaker or cruising chute. The fractional rig shortens running rigging and makes mainsail control important for depowering and balance in stronger winds. Winch layout and led‑back control options vary with owner fit‑out — broker listings often show a mix of original and owner‑upgraded hardware.
Interior and accommodation
Below decks the Centurion 40S leans into traditional joinery and comfortable living spaces rather than minimalist race interiors. Typical layouts provide an owner’s double cabin forward or aft (varies by survey), a saloon with settees either side, a navigational/work station and a galley arranged for practical use underway. The saloon benefits from natural light through deckhouse glazing and deck hatches.
Galley space is sized for cruising, with bench‑top stowage, gimballed cooker options and fridge/freezer capacity that support extended coastal or offshore passages. Heads (toilet) location and number vary by fitted option; many examples have a single heads with separate shower area or integrated wet heads. Ventilation is via opening hatches, dorade vents and the saloon’s coachroof windows.
Storage is reasonable for the size: lockers beneath berths and settees, hanging lockers and sail‑stowage areas in lazarette or cockpit lockers. As with many production yachts of its era, owners commonly modify storage and systems during refits to increase practicality for long‑term cruising.
Sailing and handling
Handling character is best described as responsive and steady. The fin‑and‑bulb keel with spade rudder combination yields a yacht that points well upwind for its class and tracks predictably in a seaway. The fractional rig keeps centre‑sheets and mainsail trim the primary controls for balance, so owners report the yacht sails well when reefing early and trimming the traveller and mainsheet to control heel.
In moderate conditions the Centurion 40S is capable of lively passage speeds and is rewarding to steer; in heavier seas it tends toward a seakindly motion rather than a snappy, short‑pitch behaviour. The relatively heavy displacement for a 40‑foot performance cruiser dampens accelerative motion but contributes to comfortable motion in swell and ocean passages.
Maneuvering under power is conventional for an inboard‑engined yacht of the size. The relatively deep draught and hull length mean berthing in tight, shallow marinas or trailer launching are not practical without special arrangements. For short‑handed crews the layout supports safe control of sails from the cockpit, but careful planning of sail changes and reefing is still essential when alone or with only two people aboard.
Australian sailing uses and conditions
For Australian owners the Centurion 40S will most commonly suit coastal cruising, extended coastal passages and offshore work inside the 60‑to‑100‑mile range; the build and tankage make it feasible for longer passages with the right owner preparations. Its seaworthiness and tankage are appropriate for Tasman crossings or south‑east Australian offshore work when correctly equipped and maintained, but as with all yachts this requires careful provisioning and safety systems appropriate to the intended voyage.
Conditions around Australia favour yachts that can handle building swell, shifting coastal winds and the occasional heavy blow. The Centurion 40S’s heavier displacement and conservative underwater profile give a comfortable ride in swell; owners operating in Australasia should consider anti‑fouling, reefing systems, and a robust safety fit‑out (jacklines, harness points, storm sails) suited to long coastal legs and offshore weather systems.
Principal strengths
- Seakindly hull and displacement that provide a comfortable motion on offshore passages.
- Refined interior finishes and practical accommodation for extended cruising.
- Performance‑tilted appendage design and fractional rig offering good upwind ability for a cruising yacht.
- Solid builder reputation and a model that circulated sufficiently on the brokerage market to make used examples available.
- Reasonable tankage for extended cruising without the complexity of a larger blue‑water yacht.
Limitations and compromises
- Deep draught options limit access to shallow anchorages and some Australian moorings; owners may need to choose sailing areas accordingly.
- Not a modern light‑displacement racer: acceleration and light‑air performance are modest compared with contemporary racing designs.
- Systems and deck hardware vary by owner refit; older examples may require upgrades to electronics, rigging and tankage for safe offshore use.
- Not trailerable and not optimised for single‑handed short‑haul racing without additional control leads and cockpit modifications.
Ownership, maintenance and refit
Wauquiez yachts are known for quality joinery and generally sound build, but maintenance needs follow the usual lifecycle for GRP hulls and production yachts from the early 2000s. Expect routine attention to deck/hull joints, through‑hull fittings, keel bolts and standing rigging replacement intervals appropriate to usage and survey recommendations. Many brokers and owners report common refit items include updated navigation electronics, replacement of older diesel installations or fuel systems, and upgrading cockpit hardware for easier short‑handed control.
Because several Centurion 40S examples remain in the brokerage market, parts and advice are available through European specialists and independent yards. Prospective long‑distance cruisers should budget for thorough systems checks — engines, shaft and cutlass bearings, seacocks, and electrical systems — plus likely refresh of tank and plumbing systems that may have aged in used yachts.
What to inspect before buying
- Structural survey: check keel‑to‑hull joint, keel bolts and surrounding laminate for signs of stress or corrosion; inspect rudder stock and rudder bearing for play or water ingress.
- Hull and deck laminate: look for soft spots, signs of water intrusion in cored areas and any evidence of osmosis on older hulls.
- Standing and running rigging: date and condition of shrouds, forestay, spreaders and turnbuckles; check mast step and chainplate beds for corrosion or cracks.
- Engine and drive: service history, hours, signs of leaks, transmission condition and shaft/propeller alignment; inspect cutlass bearing and stern gland condition.
- Systems and tanks: inspect fuel, water and waste systems for contamination, rust or leaks; verify tank capacities and condition if planning offshore work.
- Electrical and electronics: battery condition, charging systems, core navigation and communications gear adequacy for intended voyages.
- Deck hardware and winches: check winch service history, locker drainage and hatch seals; verify lifelines, stanchions and safety gear.
- Interior joinery and moisture: signs of persistent damp, water stains under deckheads, molded areas, and condition of upholstery and fittings.
Who this boat suits
The Centurion 40S is best for couples or small crews who want a seaworthy, comfortable 40‑foot cruiser with a performance edge. It appeals to sailors who plan regular coastal cruising, occasional offshore passages and who value a well‑finished interior. It is less suitable for owners who need shallow‑water access, want a minimal weight, race‑optimised hull, or require an absolutely tiny crew complement without investing in additional short‑handing modifications.
For Australian sailors considering Tasman crossings or extended coastal cruising, the Centurion 40S can be a competent platform when refitted and equipped with appropriate safety gear, communications and redundant systems. It rewards careful preparation and an owner willing to maintain and, where necessary, modernise systems to contemporary offshore standards.
Sources consulted: Wauquiez (builder), Boatsector (compiled specifications), De Valk Yachtbrokers (broker listing), NauticExpo (manufacturer brochure copy archive), WauquiezForever (owners’/archive material)
