The Westerly Conway 36 was introduced in the mid‑1970s as Westerly sought a larger, more capable cruising yacht to build on its successful smaller models. Built around a Laurent Giles hull, the Conway family offered fin and twin‑keel versions, centre and aft‑cockpit arrangements and both ketch and sloop rigs. In practice the Conway most commonly appears as a centre‑cockpit fin‑keeled ketch: a layout that divided the sail plan for easier handling and gave a separate aft cabin accessed from the saloon.
Westerly marketed the Conway at the family and bluewater cruising end of the market: a comfortable, heavyish production yacht that trades peak performance for seaworthiness, internal volume and simple, rugged systems. The boat found favour with owners who wanted a capable coastal cruiser with occasional offshore capability, independent living spaces and an economy of maintenance inherent in the period’s GRP construction and modular interiors.
Overview and design purpose
The Conway 36 was designed and offered as a comfortable, conservative cruiser for couples and families. With a centre‑cockpit arrangement and options for both ketch and sloop rigs, the intent was to give owners a well divided sail plan that is easier to shorten and balance when short‑handed — the ketch rig was especially popular because it reduced the size of the mainsail and concentrated smaller, more manageable sails aloft and abaft.
The hull shape is moderate‑displacement with a fairly full forefoot and moderate beam for the era, prioritising load carrying, upright initial stability and a soft motion through sea. The high ballast ratio and heavy displacement relative to length were chosen to deliver a steady, reassuring platform for cruising rather than a light, easily driven racer. Throughout the model life the boat was positioned as Westerly’s practical 36‑footer for family and extended cruising, with interior variants that allowed buyers to customise berthing and layout.
Designer, builder and production
Designer: Laurent Giles (Jack Laurent Giles design office). Builder: Westerly Marine Ltd, UK. Production of Conway‑group boats began in the mid‑1970s; the Conway family was launched around 1974–75. Westerly produced several related variants under different names (Conway, Solway, Galway, Medway) which share the same hull form; the Conway and Solway were centre‑cockpit, while the Galway and Medway used aft‑cockpit arrangements. In about 1978–79 Westerly introduced an updated interior package marketed as the Conway Mk II (or Conway Mk2) with improved joinery and layout changes.
Build numbers across the Conway family are modest compared with some mass‑market Westerlys; the broader Conway group has been estimated at a few hundred boats. The Solway twin‑keel variant and the Medway/Galway derivatives were produced in smaller runs and in some export markets (continental Europe) in limited numbers.
Construction and hull design
The Conway hull is hand‑laid GRP (fibre‑reinforced plastic) typical of UK production in the 1970s, with solid laminate below the waterline and cored or moulded structures in the topsides and deck areas. Westerly’s reputation at the time rested on stout laminates and conservative engineering: hulls were built for longevity rather than weight saving.
Hull form: moderate‑displacement, relatively full sections forward and a broad transom for internal volume. The fin‑keel versions use a separate lead (or iron/lead depending on build era) fin with a skeg‑mounted rudder; on twin‑keel (Solway) versions the twin bilge keels allow drying out and offer reduced draft for estuary work. Rudder: skeg‑supported rudder giving a protected profile and predictable helm feel, at the cost of slightly greater drag than a spade rudder.
Decks were conventionally arranged for the time: non‑slip finishes, integral moulded cockpit coamings and composite deck‑to‑hull joints. Early Conways had GRP moulded interior modules (a cost‑saving approach) while later Mk II boats moved to fuller timber joinery and sapele finishes which owners and the trade tend to regard as an upgrade.
Specifications
Note on specification sources: published figures for displacement, ballast, LWL and principal dimensions are consistent across period brochures and post‑production records for the Conway family, but some sail area and tankage figures were recorded using different units or when owner refits altered installed capacity. Buyers should confirm exact figures for the specific hull under consideration.
Cockpit, deck layout and sail handling
The Conway’s centre cockpit provides a sheltered helm position, an elevated viewpoint and a clear separation between saloon and aft cabin — a layout valued by cruising couples and families. The cockpit is typically deep, with high coamings and enclosed space that helps protect the helm in poorer weather; the trade‑off is reduced direct access to the foredeck and a cockpit that can be less sociable than an open aft cockpit in fine weather.
Sail handling was arranged for practical cruising: the ketch rig reduces individual sail sizes so reefing and sail changes can be accomplished with smaller crews. Period boats commonly had slab reefing on mains and mizzen and a roller‑reefing headsail. Winch placement and control lines were designed around an era when deck layout favoured mainsheet travellers and halyard leads to the mast area rather than all‑cockpit leads; many owners subsequently re‑ran lines back to the cockpit for easier short‑handed work.
Deck access around the coachroof is reasonable with decent handholds; movement forward requires care in rough seas but the broad side decks and reasonably high bulwarks make working forward manageable. Twin‑keel Solway versions are useful for drying moorings and shallow anchorages but carry a different sail‑to‑keel balance while at sea.
Interior and accommodation
One of the Conway’s selling points was its flexible interior: Westerly offered several layout options and owners often specified bespoke changes. Early Conways used GRP moulded modules for bunks and cabin soles which simplified production, while the later Mk II introduced full timber joinery (sapele) and revised layouts that improved aesthetics and usability.
Typical layout: an enclosed forward cabin with vee‑berth, a central saloon with settees and a dining table, a separate chart table/working area and an aft owner’s cabin accessed from the saloon. The centre cockpit layout creates a private aft cabin beneath the cockpit sole; heads compartments were normally provided forward and, on later versions, a second heads aft was added. Galley arrangements varied by owner, but the generator/engine space and tankage were arranged to keep machinery access practical for routine servicing.
Headroom in the saloon is comfortable for most adults; however, headspace in the corridor to the aft cabin and enclosed cabins is lower by design. Ventilation relies on multiple hatches and opening ports, and owners commonly retrofitted additional vents, fans or dorade boxes to improve airflow for warm‑weather sailing. Storage is abundant by 1970s production standards, though modern owners often upgrade lockers and wiring to accommodate contemporary systems.
Sailing and handling
On the water the Conway is not a light‑air flyer, but reviews and owner reports describe a steady, controllable yacht that tracks well and rides out confused seas with confidence. The combination of a relatively high ballast ratio and a skeg‑protected rudder gives positive directional stability and predictable helm feel; the penalty is extra wetted surface and modest acceleration.
With the ketch rig the boat is easy to balance, and reefing the mainsail and setting the mizzen or staysail allows fine adjustments to helm balance without large sail changes. In typical cruising winds the design will perform adequately on reach and close‑hauled angles, and hull speed is in line with the waterline length. Heavy displacement means the boat will carry momentum through short chop rather than being tossed about, which many cruising sailors prefer for long passages.
Manoeuvring under power benefits from the long keel/keel‑to‑rudder arrangement; reversing and tight pivoting are predictable though steering responsiveness at low speed can be leisurely. Owners replacing original propellers or updating the engine report improved handling and RPM bands after careful repowering and prop selection.
Australian sailing uses and conditions
In Australian waters the Conway 36 suits coastal cruising, island hopping and serious east coast passages rather than faster club racing or passagemaking where light‑air performance is critical. Her solid build, protected centre cockpit and load‑carrying capacity make her a candidate for family cruising around the southern states or sheltered northern passages, and the twin‑keel Solway variant is particularly useful for tidal areas where drying out is frequent.
For offshore work the Conway’s seakindly form and heavy displacement provide a comfortable motion and reserve buoyancy, but modern safety and systems upgrades (comms, redundancy, rig checks and through‑hull reviews) are prudent before committing to long ocean passages. On exposed reef and surf anchorages the higher freeboard and sheltered cockpit are advantageous, but careful crew training in deck movement and anchoring technique remains essential.
Principal strengths
- Solid, conservative construction and robust hull layup — built to last.
- Centre‑cockpit layout with private aft cabin and comfortable saloon for family cruising.
- High ballast ratio and skeg‑rudder provide directional stability and soothing motion in a seaway.
- Flexible interior layouts and later Mk II joinery improvements offer comfortable liveaboard spaces.
- Ketch rig option makes short‑handed sail handling easier by dividing sail area into smaller sails.
- Twin‑keel Solway variant allows drying out on tidal moorings and reduces draft for shallow cruising.
Limitations and compromises
- Not a light‑air performer — relatively heavy displacement and wetted surface reduce acceleration and top speed in gentle breezes.
- Early interior modules (pre‑Mk II) are utilitarian GRP mouldings that many owners refit for improved aesthetics and storage.
- Cockpit is sheltered but can feel remote from the saloon social area in fine weather compared with open aft cockpits.
- Original engine installations and electrics may be aged; many boats require repowering or major electrical refits to meet modern cruising expectations.
- Deck hardware and reefing leads were designed before widespread cockpit‑led control; retrofitting line leads and upgrading winches is common for single‑hand or short‑hand use.
Ownership, maintenance and refit
Owning a Conway is typically a maintenance‑led proposition: robust GRP hulls need routine gelcoat care, bedding and inspection of deck fittings, and vigilance on keel bolts and rudder bearings for older boats. The Westerly Wiki community and owners’ groups maintain extensive practical advice on re‑bedding, keel bolt inspection and interior repairs; these are helpful starting points when planning a refit.
Common refit items include repowering (many original Mercedes OM636 or early Volvos are either rebuilt or replaced), upgrading electrical systems to support modern navigation and communications gear, replacing old flexible fuel and water tanks if fitted, updating heads and galley fittings and refreshing the interior timberwork on early GRP‑module boats. Where twin keels are fitted, owners should pay particular attention to keel bolts and the condition of the keel‑to‑hull joint when the boat has been grounded regularly.
What to inspect before buying
- Hull laminate: check for osmosis/blistering, delamination, and any repairs around chainplates, keel attachments and through‑hulls.
- Keel and keel bolts: for fin and twin‑keel versions, inspect keel bolt condition and evidence of movement or historical re‑beds.
- Rudder and skeg: check for play in the rudder shaft, condition of bearings and any water ingress into skeg or rudder core.
- Standing rigging and spars: measure/assess the age and replacement history of standing rigging, mast stepping and chainplate integrity.
- Engine and shafting: verify service history, cooling system condition (raw vs fresh water cooled), propeller condition and any known engine room leaks.
- Deck fittings and seals: look for soft spots, signs of past leaks at winches, cleats, mast collar and windlass beds.
- Interior joinery and mouldings: early GRP modules are functional but may hide moisture; probe timber joinery for rot in Mk II refits and check joint seams.
- Electrical and plumbing: look for modern upgrades, clean battery installations, condition of wiring and evidence of corrosion at terminals.
Who this boat suits
The Westerly Conway 36 best suits cruising couples or families who value a comfortable, secure platform with generous accommodation and a conservative, proven hull form. It is well matched to sailors who plan coastal cruising, extended family holidays or occasional offshore passages where a sturdy, forgiving motion is prized over racing performance. The ketch rig appeals to short‑handed crews and those who prefer smaller individual sails; the twin‑keel variant will particularly suit sailors operating in tidal regions where drying out or shallow anchorages are routine.
Buyers looking for modern light‑air performance, minimal maintenance preps for new electronics or a spartan race boat should be aware that the Conway will require sympathetic refit work to bring systems up to current expectations. For those prepared to invest in repowering, electrical upgrades and selective re‑joinery the Conway rewards with long‑term durability and comfortable living spaces that remain attractive for family cruising.
Sources consulted: sailboatdata.com; westerly‑owners.co.uk; laurentgilesarchive.co.uk; devalk.nl; greg‑yachts.com
