Loading this page…
Loading this page…

region sailing guide
Wyndham is a small port at the head of Cambridge Gulf in the east Kimberley, Western Australia. Very large tides, strong currents and muddy water make the gulf a demanding approach.
No published listing sits within 40 km of this area yet. Browse the whole directory.
The Buccaneer Archipelago is a maze of hundreds of rocky islands at the mouth of King Sound in the Kimberley, Western Australia. Huge tides and fast tidal streams make it demanding, remote cruising.
Explore →Broome is a pearling town on Roebuck Bay in the Kimberley, Western Australia. Very large tides shape every anchorage and landing, and it is the usual southern staging point for Kimberley coast cruising.
Explore →Port Lincoln is a fishing port on Boston Bay at the southern end of Eyre Peninsula, South Australia. Its large, sheltered bay and marina make it the base for the islands at the mouth of Spencer Gulf.
Explore →Whyalla is a steel and port city on the western shore of upper Spencer Gulf, South Australia. A small marina sits beside the industrial port, with shallow flats along the shore and Point Lowly nearby.
Explore →Expect very different seasonal systems across Western Australia: the south‑west (Perth to Albany) has a strong summer afternoon sea breeze (the “Fremantle Doctor”) and winter westerly fronts, while northern WA follows a wet/dry monsoonal cycle with strong seasonal onshore winds, thunderstorms and cyclone risk in the wet season. Local headlands, estuaries and tidal flows often change what you actually feel on the water, so learn the local timing and sheltered venues first.
Explore →There are legal obligations in Western Australia for recreational boat owners and skippers covering vessel registration, carriage of safety equipment and general skipper responsibilities, but the exact requirements depend on vessel type, size, where you sail and whether the vessel is commercial or recreational. Check the Western Australian Department of Transport (DoT WA) and the national authority for the precise checklist that applies to your boat and voyage.
Explore →Pick a protected bay, estuary or river reach where you can rig, launch and arrive on calm water within a short, sheltered transit; choose a site with a good ramp or jetty, clear recovery options and a nearby sailing club, marina or commercial operator for local knowledge and help.
Explore →Choose an anchor that penetrates the seabed you expect, carry enough chain and scope, set by reversing under control until the anchor bites, then test and monitor frequently — in sand and clean mud a plough or fluke-style can work well, in weed look for clean patches or use a claw/Delta-style or dedicated weed anchor and more scope.
Explore →A practical guide for recreational sailors in Australia explaining how tides and currents work, how tidal gates (entrance bars, harbour gates and man-made locks) affect navigation, and how to plan passages and manoeuvres safely around tidal influences.
Explore →Practical guidance for recreational sailors planning coastal and remote cruising in Western Australia, focusing on tidal planning, reef awareness, navigation and safety preparation tailored to local conditions.
Explore →A practical guide for recreational sailors planning a multi-day coastal passage along Western Australia: what to consider, how to plan for weather, tides and currents, required equipment and safety checks, route-planning steps, common mistakes and sensible next steps.
Explore →A practical guide to the coastal weather systems that affect sailing along Western Australia's coast, focusing on the Fremantle Doctor, local sea breezes, and linked coastal phenomena. Explains how these systems form, when they tend to occur, how they influence boat handling and passage planning, common mistakes, and a
Explore →
Standard 10 x 2.5 inch activated coconut carbon block cartridge, 5 micron nominal. It sits in the freshwater flush line and helps remove chlorine before the flush water reaches the membrane.
Explore →
A 142-item marine first aid kit built around the Australian Scale G requirement, with a workplace kit, a Scale G module and a handbook packed in a large waterproof box.
Explore →
Spare 2.5 x 40 inch seawater reverse-osmosis membrane, the element used in every Water Makers Australia system and a common size across many other watermakers.
Explore →
The original BoatEye360 full-colour low-light camera: the same 0.0001 lux sensor as the V2 in a larger 316L stainless housing, with HDMI and analog output, at a lower price.
Explore →