Anchor Scope Calculator
Explore anchor rode length with a live, scaled side profile. Adjust water depth, bow-roller height and scope, switch between metres and feet, and save your scenario.
Start planning ↓See your scope
Move the sliders to see how depth and scope change the rode you need. Use the greatest expected water depth during your stay.
Surface to seabed, allowing for the highest tide. Correct any sounder offset.
Scope is rode length divided by depth plus bow height. These ratios are examples, not recommendations for your boat, gear or conditions.
Anchor-to-bow profile
- Rode to deploy
- 30 m
- Rode angle to seabed
- 11.5°
Straight-line geometry
The line is a taut-rode approximation, not a chain catenary or holding-power prediction. The boat symbol is not to scale. For swinging clearance, use the Anchor Swing Visualiser.
Example values are starting points. Replace them with your own figures. Saving is optional and stays on this device.
Planning aid only. Not for navigation. Check every result against official charts, tide predictions and forecasts, current conditions and your vessel’s requirements before acting on it.
How it works
Scope compares deployed rode with the full vertical distance from the bow roller to the seabed. The calculator adds water depth and bow height before applying the selected ratio.
Rode length = (water depth + bow height) × scope ratio
Worked example
At 5 m depth with a 1 m bow height and 5:1 scope, the vertical distance is 6 m and the calculated rode is 30 m.
The horizontal reach is an approximation, not the boat's complete swinging circle.
Wind, current, seabed, anchor and rode type can all change the appropriate scope.
