Boat Fuel Consumption Calculator
Estimate fuel for an engine run using hourly consumption and either travel duration or passage distance and speed. Add a percentage reserve and work in litres or US gallons.
Start planning ↓Plan fuel, reserve and usable supply
Separate the estimated burn from your additional reserve, then compare the total with usable fuel aboard.
- Choose known engine hours or motoring distance and average speed.
- Use a measured burn rate for the intended engine load. Enter usable fuel, excluding inaccessible tank contents.
- Set an additional reserve percentage and move progress to inspect estimated fuel remaining.
Reserve is added to estimated consumption, not subtracted from tank capacity. A 20% reserve on 50 L burn is 10 L extra. The model does not predict how burn rate changes with throttle or sea state.
Fuel target vs fuel aboard
- Total fuel target
- 60 L
- Engine time
- 16 h 40 min
- At 50%: estimated remaining
- 55 L
- Fuel at arrival
- 30 L
50 burn + 10 reserve
Meets the selected reserve target under these assumptions
Example values are starting points. Replace them with your own figures. Saving is optional and stays on this device.
Planning aid only. Not for navigation. Check every result against official charts, tide predictions and forecasts, current conditions and your vessel’s requirements before acting on it.
How it works
Distance mode first estimates engine hours from nautical miles and knots. Hourly consumption is then multiplied by time, and the selected reserve percentage is added.
Fuel = consumption per hour × engine hours · Total = fuel × (1 + reserve %)
Worked example
At 3 L/h, a 100 NM run at 6 kt takes 16 h 40 m and uses 50 L before reserve; adding 20% gives 60 L.
Actual consumption varies with engine, loading, sea state, wind, current, hull condition and throttle.
Use verified vessel consumption data and comply with carriage requirements.
