Cross-track Recovery Planner
Explore a ground-course intercept from a known cross-track offset. Adjust the inputs, explore the labelled visual, save your scenario and download a summary.
Start planning ↓Visualise a return to your planned track
Choose a join point ahead and see the ground-course correction from a known lateral offset.
- Establish your cross-track offset from a checked position; positive means starboard of the intended track.
- Choose how far along the track to rejoin, measured from the perpendicular foot of your position.
- Inspect the direct ground course and intercept angle. Check the entire intercept leg for hazards before using it.
Positive = starboard, negative = port when looking along the desired track.
- Course over ground to join
- 345.96 ° true
- Signed course correction
- -14.04 °
- Intercept leg distance
- 4.12 NM
- Time to join
- 41.23 min
Flat local geometry, constant SOG and a straight intercept leg. The result is course over ground, not a compass heading or current-corrected course to steer. It does not check charted hazards, traffic or whether you can achieve the course. Offset and join distance must use the same track reference.
Example values are starting points. Replace them with your own figures. Saving is optional and stays on this device.
Planning aid only. Not for navigation. Check every result against official charts, tide predictions and forecasts, current conditions and your vessel’s requirements before acting on it.
How it works
The lateral offset and distance ahead form a right triangle. The signed correction is added to the desired true track.
Correction = −atan2(starboard offset, distance ahead)
Worked example
One NM to starboard of a northbound track with a join point 4 NM ahead gives a 345.96° true ground course over a 4.12 NM leg.
This is course over ground, not a current-corrected heading. Check the intercept route for hazards.
Continue planning
Current & Course-to-Steer Simulator →
Explore current effects and calculate a true heading for a desired ground track.
Departure Checklist Builder →
Create a trip-specific checklist, add your own checks and track completion.
Sailing ETA Calculator →
Estimate passage duration and arrival from distance and speed.
