Hull Speed Calculator
Estimate the theoretical hull speed of a conventional displacement boat using its length at the waterline. It is useful for broad performance expectations and passage-speed discussions.
Start planning ↓Explore waterline length and speed
Move the length slider and follow your boat’s point along the hull-speed curve. Doubling length does not double hull speed.
- Find your boat’s loaded waterline length (LWL), not its overall length.
- Choose metres or feet, then enter the length or move the slider.
- Read the estimate and compare nearby lengths on the curve.
The 1.34 coefficient is a broad displacement-hull rule of thumb. It is not an engine setting, performance guarantee or hard limit for planing, foiling or slender hulls.
Waterline length vs theoretical speed
- Theoretical hull speed
- 8.05 kt
- Equivalent speed
- 14.91 km/h
- Waterline length
- 11 m
- Waterline length
- 36.09 ft
Example values are starting points. Replace them with your own figures. Saving is optional and stays on this device.
Planning aid only. Not for navigation. Check every result against official charts, tide predictions and forecasts, current conditions and your vessel’s requirements before acting on it.
How it works
The classic rule relates wave speed to the square root of waterline length in feet. Longer waterlines support a higher theoretical displacement speed.
Hull speed (kt) = 1.34 × √LWL (ft)
Worked example
A 36 ft waterline has a theoretical hull speed of 1.34 × √36 = 8.04 kt, or about 14.9 km/h.
Use LWL, not overall length.
This rule of thumb is not a hard speed limit and does not suit every hull form, especially planing or foiling boats.
Continue planning
Sailing ETA Calculator →
Estimate passage duration and arrival from distance and speed.
VMG Calculator →
Calculate velocity made good toward a waypoint or mark.
Knots to km/h Converter →
Convert vessel speed between knots and kilometres per hour.
Nautical Distance Calculator →
Turn passage distance into time, speed and daily-run figures.
