Initial Bearing Calculator
Calculate the initial true bearing from one decimal-degree waypoint to another along a great-circle route. Use it for broad route geometry and planning checks.
Start planning ↓See your initial true direction
Enter two positions and watch the route geometry change. Swap endpoints to see why a return bearing is not always the outward bearing plus 180°.
- Enter decimal degrees: north/east positive, south/west negative. Example: 33.5° south is −33.5.
- Change either waypoint or choose an example; the diagram and results update together.
- Read the true bearing and distance as geometry only. Plot a safe route separately on current charts.
True north is used, with no magnetic variation, compass deviation, current or leeway. The diagram has no coastlines or hazards. A great-circle arc can cross land and is not a sailing instruction.
Initial direction from waypoint A
- Great-circle distance
- 395.45 NM
- Kilometres
- 732.38 km
- Initial true bearing
- 014° T
- Earth-centred angle
- 6.59°
NNE
The initial bearing is only the direction at departure. It changes along a great-circle arc. The schematic distorts distances, especially at high latitudes.
Example values are starting points. Replace them with your own figures. Saving is optional and stays on this device.
Planning aid only. Not for navigation. Check every result against official charts, tide predictions and forecasts, current conditions and your vessel’s requirements before acting on it.
How it works
Both positions are converted to radians and spherical trigonometry finds the direction of the great-circle tangent at the starting point.
θ = atan2(sin Δλ × cos φ₂, cos φ₁ × sin φ₂ − sin φ₁ × cos φ₂ × cos Δλ)
Worked example
Enter Sydney and another waypoint to receive a three-digit initial true bearing plus a compass-point interpretation.
The bearing is true, not magnetic.
A great-circle bearing changes along a long passage and does not account for hazards, land or routing constraints.
