Multi-leg Passage Planner
Build a route timetable with individual leg speeds, stopovers and UTC arrivals. Adjust the inputs to compare scenarios, save on this device and download your results.
Start planning ↓Build your passage, leg by leg
Compare sailing time and stops on one timeline. Distances must follow your checked navigable route.
- Enter a departure in UTC, then name each leg.
- Use your planned route distance and realistic average speed over ground for each leg.
- Add stops at each leg’s end; compare arrival and ready-to-leave times.
- Total route distance
- 42 NM
- Including all stops
- 8.8 h
- 1. Harbour to headland
Arrival: 2026-12-01 09:00 UTC
After stop: 2026-12-01 09:00 UTC
- 2. Headland to anchorage
Arrival: 2026-12-01 13:48 UTC
After stop: 2026-12-01 14:48 UTC
Final arrival excludes the stop at the destination. Total elapsed time includes it. This timetable does not check whether any route or arrival time is navigable.
Example values are starting points. Replace them with your own figures. Saving is optional and stays on this device.
Planning aid only. Not for navigation. Check every result against official charts, tide predictions and forecasts, current conditions and your vessel’s requirements before acting on it.
How it works
Each leg uses its own average speed over ground. Stops are added after arrival at each leg endpoint.
Leg time (h) = distance (NM) / SOG (kt)
Worked example
18 NM at 6 kt takes 3 hours; another 24 NM at 5 kt takes 4.8 hours. Add a one-hour stop for 8.8 hours total.
Use chart-checked route distances. No route, weather or tidal-window validation is performed.
Continue planning
Sailing ETA Calculator →
Estimate passage duration and arrival from distance and speed.
Current & Course-to-Steer Simulator →
Explore current effects and calculate a true heading for a desired ground track.
Crew Watch Rota →
Build a repeating watch schedule with duty totals, a visual timeline and UTC handovers.
