
How To Sail: Sail Trim Basics -- Sailing Basics Video Series
How To Sail: Sail Trim Basics from Nautilus Sailing walks you through practical, no‑nonsense sail trim for cruising and charter boats. The presenter focuses on simple visual cues and small adjustments that make a big difference to speed, balance and control — especially useful when you don’t have high‑end instrumentation. The video explains ideal genoa positions for each point of sail: close‑hauled, close reach, beam reach, broad reach and run. You’ll learn how far the genoa’s foot should sit from the lifelines at different headings and the important rule of keeping the genoa coming off the furler at roughly 90 degrees on deep reaches to preserve the slot between sails. Telltales get a lot of attention as the primary feedback tool. The presenter describes how to read inside and outside telltales on multiple rows, why the bottom row gives most of the power, and the simple “in if inner telltales stall, out if outer telltales stall” rule. There’s also practical advice about moving the jib car to cure upper‑sail flutter. Mainsail trim is covered in plain terms too: where the boom should point for each point of sail, what to do when you have swept‑back spreaders, and the danger of chafing the sail on spreaders. The video finishes with telltale guidance for the mainsail — how leech telltales indicate whether to ease or trim and why the top telltale may flutter about half the time on a well‑trimmed main. Who this is for: beginner cruisers, charter crews and any sailor looking for straightforward, immediately usable trimming techniques. No advanced theory is required — just visual checks, small sheet or car moves, and practice to get noticeably better sail shape and boat performance.
Watch and read transcript →

