What this video covers
This clear, hands-on video walks through the essentials of docking a sailboat—approach, fender and line preparation, how wind, current and prop walk affect manoeuvres, and simple techniques for both coming alongside and departing a berth.
You’ll learn practical, safety-minded steps to make docking less stressful. The presenter explains what to check before you arrive: wind direction, current, local hazards and dock height so your fenders sit in the right place. The video covers preparing fenders and dock lines, assigning crew roles, opening gates and keeping lines clear of stanchions and lifelines.
On approach, it emphasises slow speed for steerage and lining up into the wind where possible. You’ll see how to use neutral gear to glide the boat in, and how shallow-angle approaches and gentle bow pivots let the boat ‘kiss’ the dock with the beam rather than nudge the stern. The clip describes feathering short bursts of reverse to control final positioning, warns about prop walk, and explains when and how crew should step ashore and secure cleats safely—no jumping.
For departures, the video outlines planning with crew, using the wind to advantage, and employing spring lines to pivot away. A simple stern-line trick is shown: shorten the stern line, put the boat in reverse to swing the bow out, then have the dock crew release and board. The presenter repeats the main message: practice in calm conditions on a long dock until you know how your boat responds.
This video suits novice to intermediate keelboat sailors and their crews who want a concise, practical primer on safe, repeatable docking techniques. It’s particularly useful for skippers building confidence in tight marina situations and for crews learning clear, safe roles.
Read the transcript
Morning, guys. We are down here at beautiful Marina Costa Baja in La Paz, Mexico. This is one of the locations where Nautilus Sailing conducts it’s week-long live aboard sailing courses. We’ve just had an amazing breakfast over at the Beach Club overlooking the ocean, and this morning we wanted to talk to you about docking. Docking should instill fear, trembling, and extreme caution in every sailor. Every time I bring a sailboat into a slip or to a dock, my heart still beats faster, and that’s actually a good thing. Whenever you try cramming a beautiful sailboat into a tight space surrounded by millions of dollars in yachts, and you add wind and current and prop walk, this makes for a challenging situation. We recommend when you’re working on your docking, find a nice long dock, and ideally practice your docking in calm conditions. We’re big fans of practicing docking at fuel docks. These are usually longer docks, not too many boats around, and it just gives you a little bit more room to maneuver. On this video, we’re just going to cover the basics. There’s a whole science to docking, lots of advanced techniques but we’re just going to look at the simple aspects of docking today. It’s really important, before you come into an unfamiliar marina, dock, or slip, you want to find out about the area. Four things that you want to know: Number one, you want to know the wind direction. Where is the wind coming from? Which way is it going to push your boat? Number two, is there any current in the marina, and which way is that going to push your boat? The third thing is hazards. Often, you might find yourself in an area where there’s an old dock, maybe a strip of wood coming off, maybe there’s a rock in the area. You want to know those hazards. The fourth thing is the height of the dock. This is really important, because we need to know the height at which to put our fenders so they protect our boat when we come in to dock. Another thing you want to know is the effect of prop walk on your sailboat. Most sailboats, when you put the boat in reverse, are going to pull the boat to port. Before we make our approach into the dock, there’s a couple other things that we want to get ready. We want to tie our fenders on. We then want to run our dock lines, one from the bow cleat, one from the stern cleat. Make sure they’re not going over the lifelines or around the stanchion. We also want to open up the lifeline gate, just so we’re ready to jump off on the dock. When you’re coming into a slip or a dock, really important that you plan your approach into the wind. It’s going to make things a lot easier, and just help slow your boat down. As you line up to come in with the dock, you want to be going slow. I can’t emphasize this enough. You really, really want just barely enough speed so that you have steerage. You want the boat going as slow as possible as you approach the dock. Talk with your crew. Make sure everyone is clear on their responsibilities and how they can help you dock. When the boat is one to two boat lengths from the dock, you’re going to want to go ahead and put the boat in neutral. What this is going to do is, it’s going to help you control your speed and just glide in slowly to the dock. As you make your final approach to the dock, it’s really important that you come in at as shallow an angle as possible. As the boat gets really close to the dock, you’re going to want to start pivoting the bow away from the dock. The goal here, when the boat makes contact with the dock, you want the beam of the boat, the widest part, usually near the shrouds, to gently kiss the dock. Right when the boat is about to make contact with the dock, the helmsman can feather the boat in reverse. This means just giving a little bit of reverse and go into neutral, a little bit of reverse, and go into neutral. You don’t want to slam the boat into reverse at this point, or prop walk can pull your stern away from the dock. When the boat has come to a full and complete stop, the crew with the dock lines can step off the boat and go ahead and cleat those lines off to get your boat attached to the dock. Warn you crew ahead of time you don’t want anyone leaping or jumping off the boat. As the boat comes in, if you have people trying to make flying leaps off onto the dock, it’s just a recipe for a disaster. The key to departing a dock smoothly is to plan and think carefully about how you’re going to leave the dock and talk through that with your crew. If you can, use the wind to your advantage to help blow you away from the dock. Spring lines can also be super helpful at helping you pivot your boat away from the dock. One simple trick is to shorten your stern line, have a fender right there at the back of your boat, and then put the boat in reverse. This is slowly going to pivot your bow away from the dock. The person on the dock can go ahead and release that stern line and hop on the boat. 1. Think carefully about your exit and discuss with crew. 2. Wind can help you. 3. Use spring lines to pivot away from dock. 4. Crew on dock releases lines & boards. So the key to getting good at docking is just practice, practice, practice. Like we said, practice this on a long dock, ideally in calm conditions. Just get to know your boat. Get a feel for how to dock. Get good at doing this with your crew. It’s going to make docking so much easier for you.