The 200 L/h High Output Automatic is the top of the Water Makers Australia range: three membranes and a controller that runs the system for you. It is built to order in Sydney and aimed at liveaboard families, bigger crews and charter operators on boats from about 14 m.
What it does
Three DuPont FilmTec SW30-2540 membranes and a 1.5 kW 240 V motor produce a nominal 200 litres an hour in 35,000 ppm seawater at 25 degrees Celsius. The WM-100 controller manages pressure, water-quality checks, product diversion, shutdown and flushing. Output varies with water temperature, salinity and membrane condition.
What we love about it
- It looks after itself. The controller handles pressure, quality checks, shutdown and the freshwater flush.
- With the LT1 tank sensor fitted, it starts and stops at the tank levels you set.
- It is fast: 200 litres an hour means short generator runs.
- It uses the same common 2540 membranes as the rest of the range, with a three-year warranty.
How this helps boat owners like you and me
- A full day of water for a crew of six takes a bit over an hour of running.
- Guests and family can shower without anyone watching the tank gauge.
- Nobody has to remember to flush the membranes after each run.
- Charter and liveaboard boats can keep tanks topped up without a marina stop.
What to check first
- Power: plan on a 5 kVA-class inverter or generator, plus a separate protected 12 V supply for the controller.
- Plumbing: it needs a dedicated 1 inch seawater thru-hull and seacock, with the feed pump below the waterline.
- Tank: automatic top-up needs a rigid freshwater tank for the level sensor.
- Installation: the 240 V work needs a licensed marine electrician. About 73 kg installed.
A seawater strainer is a $350 add-on. Shipping is extra.






