The 200 L/h High Output is the largest manually controlled system from Water Makers Australia. Three membranes on one pump give it the highest output in the range at a little over half the price of the automatic version. It is built to order in Sydney.
What it does
Three DuPont FilmTec SW30-2540 membranes, driven by a 1.5 kW 240 V motor, produce a nominal 200 litres an hour in 35,000 ppm seawater at 25 degrees Celsius. You start it, set the pressure and send the water to the tank yourself from the control panel. Output varies with water temperature, salinity and membrane condition.
What we love about it
- A lot of water for the power: the same 1.5 kW motor as the 80 L/h model, with two and a half times the output.
- You choose the feed pump, 12 V DC or a Davey 240 V AC unit, at the same price.
- Manual controls keep it simple to understand and to fix.
- Three-year warranty and the same common 2540 membranes across the range.
How this helps boat owners like you and me
- Two people need about 25 minutes of running a day, four about 50 minutes and six about 1 hour 10 minutes.
- Short runs mean less generator noise and fuel at anchor.
- A family or a charter crew can use water freely without planning marina stops.
- There is enough capacity to wash the boat down with fresh water after a passage.
What to check first
- Power: a 3 kVA inverter or 4 kVA generator with the 12 V feed pump, or a 5 kVA-class source with the Davey pump.
- Size and weight: about 66 to 71 kg installed, with three membrane housings to mount.
- Boat size: it is typically fitted to boats from about 14 m.
- Installation: the 240 V work needs a licensed electrician.
Shipping is extra.








