The 80 L/h High Output is Water Makers Australia's single-membrane reverse-osmosis system, built to order in Sydney. It suits cruising couples and small crews on boats of roughly 10 to 15 m that already carry a generator or a 3 kVA-class inverter.
What it does
One DuPont FilmTec SW30-2540 membrane, driven by a 1.5 kW 240 V motor and a triplex plunger pump, produces a nominal 80 litres an hour in 35,000 ppm seawater at 25 degrees Celsius. Output varies with water temperature, salinity and membrane condition.
What we love about it
- You can see what it is doing. The manual control panel has pressure gauges, a TDS meter and a flow meter, so there is no black box to trust.
- It fits around the boat. The membrane, pump, pre-filters and control panel mount separately.
- The consumables are ordinary. It uses 10-inch sediment and carbon cartridges at about $20 each and a common 2540 membrane, with yearly consumables estimated at about $260.
- It is built in Sydney, with a three-year warranty, spares shipped worldwide, and phone and email support seven days a week.
How this helps boat owners like you and me
- You stop planning the cruise around the next tap. At about 40 litres per person per day, a couple needs around an hour of running and a crew of four about two.
- You can stay at anchor longer, because water is no longer the thing that sends you back to a marina.
- Showers and a freshwater rinse for the gear stop being a luxury you ration.
- You know the running cost up front, and the parts that wear out are easy to replace yourself.
What to check first
- Power: the high-pressure motor needs a dedicated 240 V AC supply. It does not run from 12 V alone.
- Installation: you need a seawater intake and strainer below the waterline, two overboard outlets above it, and a licensed electrician for the 240 V work.
- Weight and space: about 50 kg installed, with a membrane module 1.1 m long.
The feed pump comes as 12 V DC (standard) or a Davey 240 V AC unit at the same price. Shipping is extra.








