Departure Window Planner
Work backwards from an arrival window using fast and slow passage scenarios. Adjust the inputs, explore the labelled visual, save your scenario and download a summary.
Start planning ↓Work backwards from your arrival window
Find departure times that keep both your fastest and slowest modelled arrivals inside a window you supply.
- Enter the opening and closing date/time of your chosen arrival window in UTC.
- Use your checked route distance, slow and fast average speeds over ground, and possible extra delay.
- Read the common departure interval. If none exists, widen the arrival window or review your assumptions.
- Earliest departure allowed by fast arrival
- 2026-12-01 07:43 UTC
- Latest departure allowed by slow arrival
- 2026-12-01 11:00 UTC
- Fastest journey
- 4.29 h
- Slowest journey with delay
- 7 h
These limits overlap in the model. This only tests your entered arrival window against constant average SOG and 0–maximum extra delay. It does not find daylight, bridge openings, tides or safe harbour-entry times. Establish the window from current local information. All times are UTC, not local time.
Example values are starting points. Replace them with your own figures. Saving is optional and stays on this device.
Planning aid only. Not for navigation. Check every result against official charts, tide predictions and forecasts, current conditions and your vessel’s requirements before acting on it.
How it works
The earliest departure avoids arriving before the window opens at the fastest speed. The latest avoids arriving after closing at the slowest speed plus possible delay. Their overlap is the common departure window.
Earliest = opening − shortest journey; latest = closing − longest journey
Worked example
For a 30 NM passage at 5–7 kt with up to 1 hour delay and a 12:00–18:00 UTC arrival window, the departure limits are approximately 07:43–11:00 UTC.
You supply the arrival window; no tides, daylight or access restrictions are retrieved.
