Latitude & Longitude Converter
Convert decimal degrees, degrees/minutes and degrees/minutes/seconds with a position grid. Adjust the inputs, explore the live visual, follow clear instructions and save or download your scenario.
Start planning ↓Read the same position in three formats
Paste decimal degrees, degrees and decimal minutes, or degrees/minutes/seconds. The converter recognises each field separately.
- Enter latitude and longitude separately. Examples: -33.858667, 33 51.5200 S, or 33 51 31.2 S.
- Separate components with spaces or degree/minute symbols. Use decimal points; use either a sign or a final hemisphere letter.
- Compare the three formats and the hemispheres on the grid before entering a position into another device.
Latitude first; longitude second. Minutes and seconds must be below 60. North/east are positive, south/west negative.
- Latitude · decimal degrees
- -33.858667
- Longitude · decimal degrees
- 151.214000
- Latitude · degrees/minutes
- 33° 51.5200′ S
- Longitude · degrees/minutes
- 151° 12.8400′ E
- Latitude · degrees/minutes/seconds
- 33° 51′ 31.20″ S
- Longitude · degrees/minutes/seconds
- 151° 12′ 50.40″ E
Format conversion only; the geodetic datum is unchanged. Confirm latitude/longitude order, hemisphere and the chart/device datum. The grid has no coastlines or hazards. Coordinates stay in the browser unless you explicitly save or download them.
Example values are starting points. Replace them with your own figures. Saving is optional and stays on this device.
Planning aid only. Not for navigation. Check every result against official charts, tide predictions and forecasts, current conditions and your vessel’s requirements before acting on it.
How it works
Split degrees, minutes and seconds, apply the hemisphere sign, then display the same angle in all three formats.
Decimal degrees = sign × (degrees + minutes/60 + seconds/3600)
Worked example
33° 51′ 31.2″ S converts to -33.858667° latitude.
The datum is unchanged; confirm the chart and device datum.
