Speed-log Calibration Helper
Estimate a speed-log multiplier from reciprocal GPS and instrument readings. Explore a live diagram, follow the step-by-step instructions, save a scenario and download your results.
Start planning ↓Compare your log with reciprocal runs
Estimate a multiplicative correction from two steady, reciprocal runs along the current axis.
- Use a clear, suitable test area. Record averaged GPS and log speeds on reciprocal runs at equal through-water speed.
- This method requires steady current aligned with the runs; cross-current and changing conditions invalidate cancellation.
- Compare the suggested multiplier with your instrument’s calibration method. Confirm with another run before changing settings.
Further reading: Raymarine: speed calibration guidance
- Estimated through-water speed
- 6 kt
- Mean indicated log
- 5.5 kt
- Suggested new multiplier
- 1.09 ×
- Indicated speed error
- -8.33 %
Reference speed = mean of reciprocal SOG values, only under steady collinear current and equal boat speed. New factor = existing factor × reference ÷ mean indicated log. Instruments using pulses, divisors or speed-specific tables need their own procedure. This does not adjust your instrument automatically.
Example values are starting points. Replace them with your own figures. Saving is optional and stays on this device.
Planning aid only. Not for navigation. Check every result against official charts, tide predictions and forecasts, current conditions and your vessel’s requirements before acting on it.
How it works
Averaging reciprocal GPS speeds cancels steady current only when the runs align with the current and through-water speed remains equal.
New multiplier = existing multiplier × mean reciprocal SOG ÷ mean indicated log
Worked example
GPS averages of 7 and 5 kt imply 6 kt through water under the model. A mean log reading of 5.5 kt needs 1.091 times the existing multiplier.
Cross-current, changing speed or current invalidate this simple model. Follow the instrument maker’s procedure.
