What this video covers
How To Sail: Anchoring How To - Sailing Basics Video Series walks you through every practical step to set a safe, reliable anchor and leave your boat with confidence. Using an anchoring demonstration in a sheltered bay, the presenter explains how to choose a good anchorage, judge the seabed, and account for depth, keel and freeboard when calculating scope.
What the video covers
- Choosing an anchorage: depth, holding ground (sand versus rock or weed), shelter from swell and wind, room to swing, and avoiding being blown ashore if the anchor drags.
- Calculating scope: why you must add keel depth and freeboard to the water depth and use a 5:1 chain-to-depth ratio for effective holding.
- Approaching and selecting a spot: doing a reconnaissance lap, checking for hazards, and positioning relative to other boats.
- Anchoring procedure: preparing the windlass and anchor, dropping quickly to the seabed, communicating chain out with bow signals, fitting a snubber before testing.
- Testing the set: backing under increasing engine revs (progressing to the suggested test rev range), watching a fixed point 90 degrees off the bow, using bowwatch feedback, and checking the anchor by snorkel if water clarity allows.
- Good practice: waiting aboard for 30–60 minutes after setting to ensure the anchor holds before going ashore.
Who will benefit
- New skippers and crew learning practical anchoring technique.
- Day sailors and weekend cruisers who want more reliable overnight anchors.
- Charter boat users who need a clear, step-by-step routine to avoid common mistakes.
Practical, clear and hands-on, this video is a useful refresher for anyone who wants to stop relying on luck and be confident their anchor will hold.
Read the transcript
[Music] [Applause] [Music] [Applause] [Music] hey guys today we are in the Sea of Cortez beautiful part of Mexico and we want to come in and find a really nice little anchorage just to drop the hook and have lunch go for a swim so what we're gonna do today is we're gonna talk you through the steps on how to anchor anchoring is one of those things that if you know how to do it and follow a couple of simple steps it's really pretty straightforward and easy however you will see a lot of people who really don't do it the right way we often see folks come flying into an anchorage they'll drop their anchor five minutes later they're all piling into the dinghy and they're going ashore for rum punches and it's always a little sad when you watch their boat just kind of drag through the Anchorage so we don't want that to happen we want to make sure that when we finally stop for the day or we go ashore that we know that our anchor is set really really well so what makes a good Anchorage really important that we choose an Anchorage where we're gonna feel safe and it's gonna be a great place to hang out for a night or even for a couple of days the first thing we're looking for when we come into an anchorage is depth we want to find an anchorage it has a really good depth so if we can let out the right amount of chain tour just really feel comfortable number two is we're looking for good holding brown sand is always the best option if you can find sand anchors gonna dig in and hold really well the worst holding ground things like where you got rocky bottoms maybe weaves on the bottom or even coral the anchors just not gonna dig in and hold very well so always look for sand how do you know what the quality of the bottom is we always want to check our charts before we come in and then also the other place that you can look as you're cruising guide cruising guides have a wealth of information and they'll tell you about the quality of the bottom best steps to anchor in and all that so we always check our cruising guides next thing we want to look for is shelter really important you want to sleep well at night find shelter from the swell that's the most important one one little trick there when I come into an anchorage I like to look around and see people's masts and if you look at people's masts and they're standing straight like this then usually it means there's not much swell coming and if you see people's masts doing this kind of back and forth I mean swell is refracting or wrapping in and it's going to be a bumpy night so find a place that is sheltered from the swell in terms of the winds some people really want to find shelter from the wind and colder latitudes that's definitely true view of warmer nights and tropical latitudes I actually like to find places where there is wind just because it's nice to have wind flowing through the boat and it's a little cooler aboard next thing we're looking for is room to swing we want to make sure that when we drop our anchor we have a full 360-degree circle all the way around our boat where we can swing and we're not going to hit any other boats or land or hazards in the water the last thing we're looking for is ideally you want to anchor where there's not the danger of a leash or and what a leash or is that means if your anchor drags you don't want the wind to blow you towards the beach so ideally you want the wind coming off of the beach so that it blows you away from land if your anchor does drag okay so now we're going to talk about the most important thing when it comes to anchoring and that is how much chain do we need to let out so that that anchor digs in and holds our boat this is probably the biggest mistake that so many people make so when we drop our anchor the ideal ratio of anchor chain to depth is 5 to 1 when you've got all chain on your boat which most charter boats and most larger sailboats do so we pull in to the anchorage and we look at our depth transducer and it says 10 feet right away we're tempted to say hey it's 10 feet deep times 550 feet you let out 50 feet of chain and what's interesting is you're gonna discover that you're gonna be dragging why are we dragging there's a couple of things that we haven't accounted for most depth transducers are set from the bottom of the keel so actually when we come in the depth of the water is not 10 feet we have to account for our keel so let's just say our keel is 6 feet so actually we need 10 feet plus 6 feet which is 16 feet what is 16 times 5 now we're looking at 80 feet of chain that we need out there's a big difference between 50 and 80 feet isn't there so we put it out you know what we're still dragging I wonder why the next thing we haven't accounted for is where is that anchor chain going is it actually going to the water line or is it going up to the deck of our boat it's actually going up to the deck of our boat which is quite a bit above the water we call this the freeboard on this boat let's estimate we've got a four foot free board so now we've got to add four feet plus six feet for the keel 10 feet for the depth we're dealing with 20 feet so we've got 20 feet times 5 is now a hundred feet so if you notice there's a big difference we initially drop 50 feet of chain but actually we need to double we needed a hundred feet so the biggest mistake people make is they don't account for the keel and they don't account for the freeboard so you make sure you add those into your calculations so that you have the right amount of scope to let out when you drop your anchor how does a 30 to 50 60 pound anchor hold a 20,000 pound boat really important it's all about the angles you have to have a shallow enough angle that your anchor digs in and that's why you want to make sure you let out enough chain once we've picked our Anchorage and we know where we want to be first thing you want to do is always do a lap around the Anchorage this is a great opportunity just to check things out and make sure that everything is okay and to pick a really good spot for the night we're looking at depth as we come in next thing we're looking for is hazards it could be something in the water or Rock some kind of sunken objects so have somebody up on the bow looking down to make sure that there's no hazards that we need to be aware of the next thing we want to do is go between the boats and kind of get an idea of spacing how much room is there between the different boats and where can we safely fit we always want to drop our anchor just off the stern quarter or kind of off the back of other boats you don't want to drop your anchor right next to them and end up beside another boat now a couple of things we want to do to get ready just so that anchor is ready to come down first thing we want to do is turn the anchor windlass on second thing you want to do is if you have a safety line tied to your anchor make sure you untie that next thing you want to do is we want to make sure our anchor is ready to deploy I like to get it just a little bit off the bow roller so it's ready to drop we're ready to drop the anchor now we're gonna head in and we're right over the spot that we want to drop we're gonna give the command drop and the person on the bow is going to go ahead and start releasing the anchor really important that they do that quickly and just get that anchor to the bottom and just keep letting chain out one thing that we really like to do is the person on the bow can show us hand signals just so the helmsman knows how much teen is actually on the bottom at this point so on this boat chain is marked every 25 feet so we're gonna do one for 25 feet to is the signal for 53 for 75 and so forth just so the helmsman knows how much chain is on the bottom when the right amount of chain is out the next thing we want to do before we do anything else we want to put the snubber on this number is really important that's the line that's gonna absorb the tension from the chain and it's also gonna take all of the weight off of the windlass one of the biggest mistakes we see people making is they'll drop their anchor let all the chain and then they start reversing with that chain around the windlass still winless is only held to the deck of the boat with four bolts and it's really easy to rip that right off the deck so you want to make sure you get the snubber on before you start putting it in reverse and testing that anchor now we want to test our anchor and this is where we're gonna get the peace of mind to know that our anchor is really dug in well we're safe to go Shore for rum punches and we can sleep comfortably tonight one of the things I like to remember is 1,500 rpms on a monohull simulates a 40 to 50 knot gust not super common so we know if we can set that anchor at 1500 rpms in a dozen drag we can ride out at least a 40 to 50 knot gust so the first thing we're gonna do is the anchors down I'm gonna go ahead and click it into reverse leave it at the first click that's gonna straighten out the chain rule gently once my chain is tight I can now go ahead and start slowly bringing up the RPMs I'm gonna test it at a thousand rpms first see how it holds then I'm gonna go up to 1,200 rpms and then I'm gonna go to 1,500 rpms what I'm looking for at this point I'm gonna pick a point 90 degrees from where I am and I'm gonna see if we are holding or if the boat is still moving backwards the other thing that you can do whoever is on the bow at this point if you're in Clearwater they can be looking down and they can actually see little features on the bottom to see if the anchor is dragging and the other thing they can do is they can actually put their foot on the chain and feel the vibrations if that anchor is skipping along the bottom they'll be able to feel that vibrations they'll be pretty obvious so we're looking for the anchor chain to go real tight and hold us and when I'm up to 1,500 rpms we should be good if you're a nice warm tropical water one of the things I like to do once my anchors down and set put on a mask and snorkel jump in the water go for a refreshing swim and swim all the way up to the anchor just to take a look and see how it's dug in just make sure that's really dug in nicely with the sand and it's gonna hold that's kind of the final check when you're all set come back to the boat don't race ashore two minutes after the anchor set we like to hang out crack a beer have a drink on the boat hang out for at least half an hour an hour you just kind of see what's going on with the boat see how it's swinging are there any hazards are you dragging and once you've had that half an hour to an hour on the boat and you really know things are good that's when you can head to shore so these are the things that we like to do just to make sure the anchor set really well and honestly guys this is going to give you a lot more peace of mind when you do leave the boat and at nighttime you'll be able to sleep a lot better [Music] [Applause] thanks for watching be sure to subscribe and hit the bell so you'll be notified of future videos lots more great videos are in the works with all kinds of practical sailing tips be sure to check out the next video to continue learning from our basic sailing series