Loading this page…
Loading this page…

Other marine service
About
LM Custom Marine is based beside Sydney Harbour at Darling Point and focuses on custom marine trimming and upholstery. Its location makes the business particularly relevant to yachts and motor vessels kept around Rushcutters Bay, Double Bay and the wider harbour.
Service area: Sydney Harbour and metropolitan Sydney
LM Custom Marine is based beside Sydney Harbour at Darling Point and focuses on custom marine trimming and upholstery. Its location makes the business particularly relevant to yachts and motor vessels kept around Rushcutters Bay, Double Bay and the wider harbour.
LM Custom Marine currently offers Marine trimming; upholstery; covers; custom canvas; cockpit and interior soft furnishings. The workshop or operating location is 1B New Beach Road, Darling Point NSW 2027, with service coverage described as Sydney Harbour and metropolitan Sydney. Current company material explicitly identifies marine or boating work in the areas of marine trimming; upholstery; covers; custom canvas; cockpit and interior soft furnishings. Marine upholstery should be considered as a system of covering, thread, foam, backing and drainage; replacing only the visible vinyl can leave old waterlogged or collapsed foam underneath.
Marine canvas, upholstery, boat covers, yacht rigging or related work is central to the business rather than a minor side service. Owners can approach the company with a boat-specific job and expect the project to be assessed in the context of marine exposure, onboard use and vessel layout.
For trimming work, photographs are useful for an initial conversation, but custom canvas and upholstery normally need accurate measurement or patterning on the actual boat. The quote should identify the fabric or vinyl, thread, clear material, foam where relevant, zippers, fasteners, frame work and whether removal and installation are included. Boat-specific work should be quoted against the actual vessel wherever possible.
Keep exploring
Other marine service
BCF Belrose | Boating, Camping & Fishing StoreBelrose, NSW4.4 · 252 Google reviews
View profileDimensions, access, existing fittings, condition of mounting points and the amount of removal, repair or fabrication required can materially change the job. For canvas and upholstery, material selection should consider UV exposure, salt, moisture, ventilation, cleaning and how the item will be stored. For rope and rigging, line construction, diameter, stretch, chafe, working load and compatibility with winches, clutches, sheaves or terminals all matter.
LM Custom Marine is relevant to boat owners in Sydney Harbour and metropolitan Sydney.
Plan to transit Sydney Heads and northern NSW estuary entrances to take advantage of favourable tidal streams or slack water; account for local acceleration over shoals, eddies, wind-on-current effects and river discharge, and always check the latest local observations and tide/stream products before departure.
Explore →Expect the usual IALA-B lateral system (red and green), cardinal and isolated-danger marks, safe-water and special marks, plus harbour-specific fairway buoys, leading/transit marks and exclusion or speed‑limit buoys. Check local harbour charts and Notices to Mariners for exact positions and light characteristics before entry.
Explore →Usually not for a small sailing dinghy. In NSW a boat driving licence is needed only to drive at 10 knots or more, or to drive a personal watercraft, and a vessel must be registered if it has an engine of 4 kW or more, is 5.5 m or longer, or needs a mooring licence or marina berth. A trailer towed on public roads needs its own registration.
Explore →Plan as a chain of conservative daily legs tied to your boat’s real-world fuel and speed in the expected sea state, with confirmed primary and alternate anchorages/berths, fuel legs and back-up fuel options, and a documented emergency/diversion plan (comms, tow and med-evac). Build tidal and weather gates into each leg and carry chart and comms redundancy.
Explore →Practical guide for recreational sailors planning passages, anchorages and visits to Ningaloo Reef and the Exmouth coast. Covers anchoring considerations, marine park rules and how local weather, tides and currents affect safety and enjoyment.
Explore →Practical guide for recreational sailors approaching Fremantle Harbour: what to expect on the approaches, local weather and tidal influences, navigational considerations, berthing and facilities, communications and safety checks, common mistakes and sensible next steps.
Explore →Practical guide for recreational sailors planning passage on the Hawkesbury River: how to plan around tides, choose anchorages, read local conditions and prepare the boat and crew for a safe, comfortable trip.
Explore →Practical guidance for recreational sailors in Australia on assessing swell, tide and wind, choosing the safest time to cross a coastal bar, preparing crew and gear, and making the decision to go or turn back.
Explore →
Hand-held, non-flammable laser signalling devices for day and night use, in red, green and Magnum versions, waterproof to 24 m and running for 5 to 72 hours on a battery.
Explore →
A 2000 lumen headlamp with spot and flood beams, rated IP68 and submersible to 2 metres, with a 141 metre beam and up to 30 hours on low.
Explore →
Compact throwable flotation ring that inflates automatically when it reaches the water. It packs to 300 x 120 mm and weighs about 590 g with its CO2 cylinder.
Explore →
Man-overboard recovery sling with 50 m of floating reflective line. You trail it astern to make contact, then use it to pull the person back and lift them aboard.
Explore →