Sail Area Estimator
Compare mainsail and headsail triangle areas with a scaled sail diagram. Explore a live diagram, follow the step-by-step instructions, save a scenario and download your results.
Start planning ↓Compare two sail triangles
Estimate flat triangular mainsail and headsail areas using measured luffs and perpendicular widths.
- Measure each sail’s luff and the perpendicular distance from its clew to the luff line.
- Enter dimensions in metres. Both triangles share the same scale in the diagram.
- Compare the areas, then consult sailmaker measurements for actual area, roach or rating calculations.
Clew-to-luff perpendicular distance; not the curved foot length.
Shortest distance from clew to the luff line, not the foot length.
- Mainsail triangle
- 24 m²
- Headsail triangle
- 29.25 m²
- Combined triangle area
- 53.25 m²
- Combined area
- 573.18 ft²
Geometric estimate only: area = luff × perpendicular width ÷ 2. Excludes roach, hollow edges, sail curvature and reef shape. Not a measured sail area, rating certificate, reefing recommendation or load calculation.
Example values are starting points. Replace them with your own figures. Saving is optional and stays on this device.
Planning aid only. Not for navigation. Check every result against official charts, tide predictions and forecasts, current conditions and your vessel’s requirements before acting on it.
How it works
Each flat triangle uses luff length and clew-to-luff perpendicular width. Curved edges and roach are excluded.
Triangle area = luff × perpendicular width ÷ 2
Worked example
A 12 m luff and 4 m perpendicular width give 24 m². A 13 m headsail luff with 4.5 m LP gives 29.25 m².
Not measured sail area, rating data, a reefing recommendation or a sail-load calculation.
