Propeller Slip Calculator
Compare theoretical pitch speed with measured speed through water and shaft revolutions. Adjust the inputs, explore the live visual, follow clear instructions and save or download your scenario.
Start planning ↓Compare theoretical pitch speed with measured speed
Estimate apparent propeller slip from steady engine RPM, reduction ratio, pitch and speed through water.
- Record steady RPM and reliable speed through water at the same operating point.
- Enter the gearbox reduction and propeller pitch in inches.
- Compare theoretical advance with measured advance. A negative result calls for checking current effects, instruments, pitch and ratio.
For a 2.5:1 gearbox, enter 2.5. Check the actual transmission specification.
GPS SOG includes current and can distort this comparison.
Further reading: Mercury Marine: understanding propeller slip
- Apparent slip
- 49.37 %
- Theoretical pitch speed
- 11.85 kt
- Propeller shaft speed
- 960 RPM
- Measured advance per revolution
- 7.6 inches
Slip is not propeller efficiency and zero slip is not a tuning target. Stamped pitch, cup, loading and measurement error affect the result. This calculator does not select a propeller or recommend RPM; follow the engine and transmission specifications.
Example values are starting points. Replace them with your own figures. Saving is optional and stays on this device.
Planning aid only. Not for navigation. Check every result against official charts, tide predictions and forecasts, current conditions and your vessel’s requirements before acting on it.
How it works
Engine RPM divided by reduction gives shaft RPM. Pitch advance gives theoretical speed, compared with measured speed.
Slip % = 100 × (1 − measured speed / theoretical pitch speed)
Worked example
2,400 engine RPM with 2.5:1 reduction gives 960 shaft RPM.
Slip is not propeller efficiency; GPS speed includes current.
