Most fixed VHF radios sold in the last 20 years have a red distress button. On a great many boats it does nothing useful, because the radio was never given an MMSI or a GPS position. Fixing that takes an hour.
What DSC does
Hold the button and the radio sends a digital alert on channel 70 with your identity and position. Every DSC radio in range sounds an alarm, and so do shore stations where they keep a DSC watch. It then switches to channel 16 for your voice call.
Step 1: get an MMSI
In Australia it comes from the Australian Maritime Safety Authority. You need the right marine radio operator certificate. Use the same MMSI in your AIS.
Step 2: program it
Enter the number through the radio's menu. Read it back twice before confirming. Most radios let the owner enter it only once or twice; after that it goes back to a dealer.
Step 3: give the radio a position
- Many current radios have GPS built in. Check it shows a position with the plotter off.
- Otherwise connect it to the plotter or network. Then confirm the position shows on the radio's screen.
- Wire it so the radio and its GPS source work even if the plotter is switched off.
Step 4: test without sending a distress
- Never press the red button to test.
- Use the radio's DSC test call function to a coast station or another boat, where one is offered, or make a routine individual call to a friend's MMSI.
- Check the radio shows time and position on its normal display.
Step 5: brief the crew
Show everyone: lift the cover, press and hold the red button for five seconds, then say Mayday on 16. Stick a card beside the radio with the boat's name, call sign and MMSI and the words of a Mayday call.
Keep in mind
- DSC range is VHF range: line of sight from your antenna.
- Not every area has shore stations listening for DSC. Follow up by voice on 16 every time, and carry an EPIRB.
What you need first
- An MMSI for the boat. In Australia it is issued by AMSA and needs a marine radio operator qualification.
- A GPS position feeding the radio, either built in or from the network
- The radio manual. The menus differ between makers.
- Your emergency contacts updated on the MMSI record
Check the GPS feed
A DSC distress alert without a position is a call for help with no address. After setup, look at the radio display. It should show your latitude, longitude and the time. If it shows no position, or asks you to enter one by hand, the GPS feed is missing. Fix that before you go anywhere. If the radio relies on the plotter for position, remember that it loses it when the plotter is off.
What happens when you press the button
| Step | What happens |
|---|---|
| Lift the cover, hold the red button about 5 seconds | The radio sends your MMSI, position and time on channel 70 |
| Radio switches to channel 16 | Ready for voice |
| You make a voice Mayday on 16 | Tells everyone what is wrong and what you need |
| Alert repeats every few minutes | Until a station acknowledges or you cancel |
The button does not replace the voice call. It gets attention and gives your position. Then you talk.
Mistakes to avoid
- Entering the MMSI wrong. Many radios allow only one or two attempts before a dealer reset.
- Selling the boat with your MMSI still in the radio, or buying one with the last owner details.
- Never showing the crew. Everyone aboard should be able to lift the cover and hold the button.
- Thinking a handheld is the same. A handheld DSC radio needs its own setup and has far less range.
If you send one by mistake
Do not just switch the radio off. Cancel the alert on the radio, then make a voice call on channel 16 to all stations saying who you are, your MMSI, and that the distress alert was sent in error. Then tell the rescue authority. An honest mistake that you report is not a problem. One you ignore can start a search.







