Do this once a season. It takes 20 minutes and it catches problems while they are a cheap repair.
On the dock
Spread each sail out on clean ground or grass.
- Stitching. Run a fingernail along the seams on the leech and foot. If thread lifts or breaks, the sail needs restitching. Sun kills thread before cloth.
- Cloth. Fold a corner and pinch hard. Cloth that feels like a soft bedsheet, or that cracks on the fold line in a laminate, is tired.
- The poke test. Push a blunt pencil against sun exposed cloth near the leech. If it goes through, the cloth is finished.
- Corners. Look for elongated rings, torn webbing and loose hand stitching at tack, clew and head.
- Chafe. Check where the sail touches spreaders, stanchions and the pulpit.
- UV strip. Faded, thin or peeling cover on a furling headsail needs replacing now.
- Battens and pockets. Broken battens and worn pocket ends tear the sail.
- Luff. Slides, hanks or bolt rope intact and sewn on firmly.
Under way
Pick a day with 10 to 14 knots and sail close hauled.
- Draft position. The deepest part of the sail should be about 40 to 50% back from the luff. If it has moved aft and halyard tension does not pull it forward, the cloth has stretched.
- Depth. If you cannot flatten the sail with outhaul, backstay and halyard, it is blown out.
- Leech. A hooked leech that curls to windward, or one that flutters whatever you do with the leech line, means stretch.
- Take photos looking up from under the boom and from the foredeck. A sailmaker can judge shape from them.
What to do with the result
- Sound cloth, bad stitching: restitch. Cheap and worth it.
- Sound cloth, a little too full: ask about a recut.
- Soft cloth, draft aft, or a failed poke test: replace.
Keep a record
Write the date and what you found in the log. The trend matters more than one inspection.
The decision at a glance
What you need
- A dry, calm day and somewhere clean to spread the sail, or a light wind day on the mooring
- A camera or phone for photos from under the boom
- A blunt point such as a ballpoint pen to test stitching
- Tape and a marker to flag problems for the sailmaker
The shape test from the cockpit
Go sailing in 8 to 12 knots, close hauled, and lie under the boom looking up. Take a photo of the mainsail from the middle of the foot. Draw a line on the photo along each draft stripe from luff to leech. The deepest point should be a little forward of the middle. If it has moved aft and will not come forward with more halyard or cunningham, the cloth has stretched. A blown out sail heels the boat more and points lower. No repair fixes that.
Where sails fail first
| Place | What to look for |
|---|---|
| Leech | Fluttering, broken threads, UV damage on a furling sail |
| Batten pockets | Worn ends, batten poking through |
| Spreader and stanchion contact points | Chafe, shiny or thin patches |
| Corners: head, tack, clew | Distorted rings, lifting reinforcement |
| Seams | Stitching that breaks when you run a pen along it |
| UV strip on a furling genoa | Faded, brittle, tearing by hand |
Repair, recut or replace
Stitching, chafe patches, a new UV strip and batten pocket repairs are routine jobs and worth doing on a sail with sound cloth. A recut can take some fullness out of a sail that is slightly stretched. If the cloth itself tears easily, feels soft like a bedsheet, or the shape has gone, money spent on repairs is wasted. Ask a sailmaker for an honest opinion and expect to pay for the inspection.
Mistakes to avoid
- Checking sails only when one tears.
- Judging by colour. A white sail can be finished and a stained one fine.
- Leaving small chafe for next season. Small holes become long tears in a breeze.
