A 406 MHz beacon tells the rescue coordination centre who you are as well as where. That only works if the registration is right. Then they can phone your emergency contacts within minutes and learn how many are aboard and where you were heading.
Step 1: register it
- In Australia, registration is with the Australian Maritime Safety Authority and it is free.
- You need the beacon's 15 character hex ID, printed on its label.
- Enter the vessel details, your contact numbers and two emergency contacts ashore who know your plans.
- Keep the confirmation aboard.
Step 2: keep it current
- Registration needs renewing every two years. Update it sooner if you change phone numbers, sell the boat or move the beacon to another vessel.
- Before a long passage, log in and add trip details where the system allows, and give your shore contact a written plan.
Step 3: test it properly
- Use the self test function only, exactly as the maker describes. It checks the battery and transmitter without sending an alert.
- Test monthly, or as the maker advises. Too many tests shorten the battery life.
- Never switch it on to see if it works. If you set one off by accident, turn it off and call the rescue coordination centre straight away to say it was a mistake. There is no penalty for an honest error.
Step 4: check the dates
- Battery expiry is printed on the beacon. Have it replaced by an authorised agent before that date.
- Float free brackets have a hydrostatic release with its own expiry, usually two years.
Calculator
Safety gear service date
Work out when an item is next due from the date on its label or certificate.
- Enter a date
Step 5: mount it where it works
- A manual bracket by the companionway, where the last person out can grab it.
- A float free bracket on deck, clear of rigging that could trap it, if you sail offshore.
- Not in the grab bag unless you have a second one. The boat's beacon should be reachable without digging.
Step 6: brief the crew
Everyone should know where it is, how to activate it, and to keep it upright, aerial clear, tied to them or the raft.
Old beacons
Do not bin them. Remove the battery if the maker says how, and return the beacon to a battery or marine store that takes them, then cancel the registration.
What happens after you switch it on
EPIRB, PLB or both
| EPIRB | PLB | |
|---|---|---|
| Registered to | The boat | A person |
| Battery life when on | 48 hours or more | 24 hours or more |
| Floats upright and transmits | Yes | Often needs to be held clear of the water |
| Best for | The boat and the raft | Each crew member on deck, especially at night |
They do different jobs. The EPIRB is for the boat going down. The PLB is for one person in the water.
Details to have ready when you register
- The 15 character hex ID printed on the beacon
- Boat name, type, length, colour and registration
- Your phone numbers
- Two emergency contacts ashore who will know your plans and will answer the phone
- Radio call sign and MMSI if you have them
In Australia registration is with AMSA and is free. Keep proof of registration on board. Check the AMSA site for the current renewal period and update the record whenever the boat, your number or your contacts change.
Features worth knowing
Newer beacons add GPS, which cuts the search area from kilometres to metres and is worth insisting on. Some add AIS, so nearby vessels see you on their plotters, and a return link light that tells you the alert was received. A float free bracket releases the EPIRB automatically if the boat sinks. Check which type your state requires for the waters you sail.
Mistakes to avoid
- Testing by switching it on. Use the self test function only, for the time and as often as the maker allows, because each test uses battery.
- Leaving it registered to the previous owner.
- Keeping it in a locker under gear. Mount it by the companionway.
- Ignoring the battery expiry date on the label.
- Throwing an old beacon in a bin. Disconnect the battery and dispose of it as AMSA advises, or it can set off a search.
If it goes off by accident
Switch it off and phone the rescue coordination centre straight away to tell them it was a mistake. In Australia that is AMSA. There is no penalty for an honest accidental activation that you report.











